Enclosures and housings
Driver Seat Cushion & Seat Pan Assembly
- Bounding box
- 460.0 × 500.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Reference: the attached driver seat drawing (DO NOT SCALE; the numbers below are authoritative). Units mm. Coordinates: origin at the H-point, +X toward the seat front, +Y toward the seat's left, +Z up. Seat centre-line is the plane Y=0. Make every part a separate named solid with a parameter for each dimension. Create two solids: 1. cushion: X from -111 to +349, Y from -250 to +250, Z from -110 to -35. Top surface flat up to X=+310, then a front roll-over of R40 down to X=+349. Vertical front corners R60. Mid-grey. 2. seat_pan: 3 mm steel plate, X from -100 to +340, Y +/-235, top at Z=-110, underside at Z=-113, with 22 mm turned-down flanges on all four sides down to Z=-135. Black.
Parameters
| Name | Value | Range |
|---|---|---|
| Cushion rear X | -111 mm | -350 – 0 |
| Cushion front X | 349 mm | 150 – 500 |
| Cushion width (Y) | 500 mm | 300 – 800 |
| Cushion top Z | -35 mm | -80 – 20 |
| Cushion bottom Z | -110 mm | -250 – -60 |
| Roll-over start X | 310 mm | 100 – 450 |
| Front roll-over radius | 40 mm | 10 – 150 |
| Front corner radius (plan) | 60 mm | 0 – 200 |
| Pan rear X | -100 mm | -300 – 50 |
| Pan front X | 340 mm | 150 – 450 |
| Pan width (Y) | 470 mm | 200 – 800 |
| Pan plate thickness | 3 mm | 1 – 12 |
| Pan top Z | -110 mm | -250 – -40 |
| Turned-down flange depth | 22 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no