Enclosures and housings
Dragon Sentinel Vambrace
- Bounding box
- 105.3 × 82.4 × 220 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a highly detailed 3D-printable fantasy cosplay forearm armor named DRAGON SENTINEL. Create one solid, wearable-style forearm armor shell with these dimensions: - Length: 220 mm - Maximum width: 105 mm - Wrist-end width: 80 mm - Wall thickness: 3 mm GEOMETRY: - Curved convex outer armor surface. - Tapered shape, wider at the elbow and narrower at the wrist. - Open C-shaped underside for inserting the forearm. - Raised central angular ridge running lengthwise. - Three raised decorative armor ribs. - Two reinforced side flanges. - Four rounded rectangular strap holes, two near each end. - Smooth rounded edges and clean transitions. STYLE: Original futuristic medieval dragon warrior armor. Aggressive angular styling, premium fantasy cosplay appearance, symmetrical construction and realistic proportions. MANUFACTURING: Create actual solid 3D CAD geometry, not a 2D drawing or concept image. Ensure the shell is printable, has consistent wall thickness, no floating pieces and no disconnected geometry. Show the complete standalone armor piece without a human arm, mannequin or display stand.
Parameters
| Name | Value | Range |
|---|---|---|
| Length wrist to elbow | 220 mm | 120 – 320 |
| Outer width at elbow | 105 mm | 60 – 160 |
| Outer width at wrist | 80 mm | 50 – 140 |
| Shell wall thickness | 3 mm | 1.6 – 6 |
| Cross-section depth / width ratio | 0.86 mm | 0.6 – 1.2 |
| C-opening start angle | -35 deg | -80 – -5 |
| C-opening end angle | 215 deg | 185 – 260 |
| Central ridge height | 7 mm | 0 – 16 |
| Ridge half angular width | 34 deg | 10 – 70 |
| Decorative rib height | 3 mm | 0 – 8 |
| Rib half width along length | 13 mm | 4 – 30 |
| Reinforced flange thickness | 5 mm | 0 – 12 |
| Flange taper angular length | 30 deg | 6 – 70 |
| Slot length along the arm | 20 mm | 8 – 40 |
| Slot width | 8 mm | 4 – 20 |
| Slot distance from each end | 26 mm | 8 – 80 |
| Slot angle on the shell | -22 deg | -60 – -6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,