Brackets and mounts
Drafted PA66-GF30 Enclosure 60x42x10
- Bounding box
- 60.0 × 42.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a technical injection molded plastic enclosure. Dimensions: 60 x 42 x 10 mm Material: PA66 GF30 Wall thickness: 2.5 mm Draft: 1 degree Features: - Four corner mounting bosses - One central boss - Internal reinforcing ribs - Rounded corners - Four mounting holes - Industrial design Create a watertight solid CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (X) | 60 mm | 20 – 200 |
| Width (Y) | 42 mm | 20 – 150 |
| Height (Z) | 10 mm | 6 – 80 |
| Wall Thickness | 2.5 mm | 0.8 – 6 |
| Floor Thickness | 2.5 mm | 0.8 – 8 |
| Draft Angle | 1 deg | 0 – 5 |
| Corner Radius | 7 mm | 1 – 18 |
| Corner Boss OD | 7 mm | 3 – 16 |
| Boss Height | 6 mm | 1 – 30 |
| Mounting Hole Dia | 3.2 mm | 1 – 10 |
| Central Boss OD | 9 mm | 3 – 25 |
| Rib Thickness | 1.5 mm | 0.5 – 5 |
| Rib Height | 4 mm | 0.5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
