Enclosures and housings
Dovetail Wheel + Box Mount
- Bounding box
- 72 × 50 × 18 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
no i meant like a wheel that can be connected to a box so that you can move it. and make it only have the male end so that it can be connected
Parameters
| Name | Value | Range |
|---|---|---|
| Wheel outer diameter | 50 mm | 20 – 120 |
| Wheel thickness | 8 mm | 3 – 20 |
| Axle bore diameter | 5 mm | 2 – 16 |
| Hub boss diameter | 14 mm | 6 – 40 |
| Hub boss height above the wheel | 2 mm | 0 – 8 |
| Lightening holes (0 = solid disc) | 5 mm | 0 – 12 |
| Lightening hole diameter | 6 mm | 2 – 14 |
| Lightening hole pitch radius | 13 mm | 5 – 45 |
| Dovetail neck width | 6 mm | 3 – 20 |
| Dovetail head width | 10 mm | 4 – 30 |
| Dovetail length | 8 mm | 3 – 20 |
| Dovetail slot clearance per side | 0.25 mm | 0.1 – 0.6 |
| Mount block length along X | 22 mm | 10 – 50 |
| Mount block width along Y | 26 mm | 12 – 60 |
| Mount block height along Z | 18 mm | 8 – 40 |
| Screw hole diameter | 4.5 mm | 2.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,