Enclosures and housings
Double-Door Sheet-Metal Cabinet
- Bounding box
- 1143.0 × 457.0 × 1270.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
Overall dimensions: 45 inches wide × 18 inches deep × 50 inches high. Model the cabinet as a rectangular sheet-metal enclosure with: Flat top Flat left and right side panels Flat back Two equal-width front doors Narrow vertical gap between the two doors Small perimeter gaps around the doors Simple recessed rectangular handle on the right-hand door Slight sheet-metal edge flanges around the front opening Raised bottom base/plinth approximately 4–5 inches high Left and right vertical feet/supports at the bottom Recessed open toe-space between the bottom supports
Parameters
| Name | Value | Range |
|---|---|---|
| Cabinet Width | 1143 mm | 600 – 2000 |
| Cabinet Depth | 457 mm | 300 – 900 |
| Cabinet Height | 1270 mm | 600 – 2000 |
| Sheet Thickness | 2 mm | 0.5 – 6 |
| Front Flange Width | 10 mm | 3 – 40 |
| Front Flange Thickness | 2 mm | 0.5 – 6 |
| Door Leaf Width | 564 mm | 200 – 900 |
| Door Leaf Height | 1133 mm | 300 – 1800 |
| Door Thickness | 2 mm | 0.5 – 6 |
| Perimeter Gap | 3 mm | 0.5 – 15 |
| Centre Gap | 5 mm | 0.5 – 20 |
| Handle Width | 120 mm | 40 – 300 |
| Handle Height | 40 mm | 15 – 150 |
| Handle Recess Depth | 15 mm | 5 – 80 |
| Handle Rim Wall | 5 mm | 1 – 20 |
| Handle Back Wall | 2 mm | 1 – 10 |
| Handle Offset From Inner Edge | 10 mm | 3 – 200 |
| Plinth Height | 127 mm | 20 – 400 |
| Foot Support Width | 75 mm | 20 – 200 |
| Hinge Strap Height | 60 mm | 20 – 200 |
| Hinge Strap Depth | 20 mm | 8 – 80 |
| Hinges Per Door | 3 pcs | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no