Brackets and mounts
Doorbell Sliding-Cover Mounting Box
- Bounding box
- 228.6 × 60.0 × 40.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a hollow rectangular box (rectangular prism) designed to function as a mounting base for a doorbell. Requirements: - The object must have a rectangular prism shape. - The interior must be completely hollow. - The bottom side must feature a removable sliding cover, designed to slide into grooves or rails integrated into the box. - The front face must have a circular hole, centered horizontally, for mounting or fitting the doorbell button. - The hole must pass completely through the front wall. - The box must have sufficient wall thickness to ensure structural strength and durability. - All edges should be clean and slightly rounded. - The design must be suitable for FDM 3D printing. - The sliding bottom cover must be a separate printable component that fits securely into the integrated rails. Generate a precise, editable 3D CAD model with separate components for the main hollow box and the sliding bottom cover. Ensure that all parts are dimensionally accurate and exportable as STL files.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width | 100 mm | 40 – 300 |
| Outer depth | 60 mm | 20 – 200 |
| Outer height | 40 mm | 20 – 200 |
| Wall thickness | 3 mm | 1.2 – 8 |
| Outer edge rounding | 1 mm | 0.4 – 5 |
| Front through-hole diameter | 22 mm | 5 – 80 |
| Hole centre height above bottom | 20 mm | 5 – 150 |
| Cover plate thickness | 3 mm | 1.2 – 8 |
| Rail / lip height | 2 mm | 1 – 6 |
| Rail / groove depth | 2 mm | 0.8 – 5 |
| Groove floor height above bottom | 1 mm | 0.4 – 6 |
| Sliding clearance per side | 0.2 mm | 0.1 – 0.5 |
| X spacing between exploded parts | 130 mm | 60 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
