Enclosures and housings
Door Pocket with Sliding Lid
- Bounding box
- 380.0 × 50.0 × 65.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric automotive door storage pocket inspired by the rear door storage compartment of the Fiat Punto (Brazilian model, 2013-2017). Overall dimensions: - Length: 180 mm - Height: 60 mm - Depth: 50 mm - Wall thickness: 2.5 mm - Rounded corners with 4 mm radius. The model should consist of: 1. A main storage compartment with an open front and smooth internal surfaces. 2. A flat top surface containing a sliding lid. 3. The sliding lid must move in integrated rails, printed as separate parts. 4. The rails must be printable without support. 5. Include mechanical end stops so the lid cannot slide out accidentally. 6. Leave a clearance of 0.3 mm between lid and rails for FDM printing. 7. Add a finger recess at one end of the lid for easy opening. 8. Include drainage holes in the bottom of the compartment. 9. Add reinforcing ribs underneath while keeping the exterior clean. 10. Design optimized for ABS printing with no overhangs greater than 45 degrees. 11. Separate the body and the sliding lid into two printable components. 12. All surfaces should be slightly filleted for strength and appearance. 13. Keep the design modern, OEM-style, matching Fiat interior aesthetics. 14. No logos or text. Output as a fully parametric CAD model suitable for STEP and STL export.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 180 mm | 100 – 300 |
| Body Height | 60 mm | 40 – 100 |
| Body Depth | 50 mm | 30 – 80 |
| Wall Thickness | 2.5 mm | 1 – 5 |
| Corner Radius | 4 mm | 0 – 10 |
| Lid Thickness | 3 mm | 1 – 5 |
| Lid Clearance | 0.3 mm | 0.1 – 1 |
| Lid Length | 170 mm | 100 – 200 |
| Ledge Width | 3 mm | 1 – 5 |
| Ledge Height | 7 mm | 3 – 10 |
| Stop Height | 2 mm | 1 – 5 |
| Stop Length | 5 mm | 2 – 10 |
| Drain Hole Diameter | 5 mm | 2 – 10 |
| Rib Height | 5 mm | 2 – 10 |
| Rib Width | 4 mm | 2 – 6 |
| Number of Ribs | 3 | 1 – 5 |
| Layout Gap | 30 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no