Enclosures and housings
Dog Crate Cabinet
- Bounding box
- 24.0 × 650.0 × 700.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed parametric CAD model of a premium modern dog crate / furniture crate based on a rectangular cabinet structure. The design should look like a high-end piece of interior furniture rather than a standard pet cage. The overall form is a clean rectangular box with sharp square edges, approximately 1200 mm wide x 650 mm deep x 700 mm high. Use a light birch plywood outer frame with visible laminated plywood edges. The plywood should feel premium, with clean mitred or layered edge detailing. Frame thickness should be around 24–30 mm, with slightly deeper front framing around the door opening.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 1200 mm | 800 – 2000 |
| Overall Depth | 650 mm | 400 – 1000 |
| Overall Height | 700 mm | 500 – 1200 |
| Side Panel Thickness | 24 mm | 12 – 40 |
| Top / Bottom Panel Thickness | 24 mm | 12 – 40 |
| Top / Bottom Panel Depth | 602 mm | 300 – 900 |
| Front Frame Thickness | 30 mm | 15 – 50 |
| Back Panel Thickness | 18 mm | 9 – 30 |
| Door Thickness | 24 mm | 12 – 30 |
| Frame Opening Width | 1100 mm | 600 – 1800 |
| Frame Opening Height | 600 mm | 400 – 1000 |
| Door Width | 1090 mm | 500 – 1800 |
| Door Height | 590 mm | 300 – 1000 |
| Door Slat Count | 5 | 1 – 10 |
| Slat Length | 800 mm | 200 – 1500 |
| Slat Width | 8 mm | 3 – 20 |
| Hinge Radius | 3 mm | 1 – 5 |
| Hinge Offset from Edge | 50 mm | 20 – 150 |
| Latch Width | 5 mm | 2 – 15 |
| Latch Depth | 10 mm | 3 – 20 |
| Latch Height | 20 mm | 8 – 40 |
| Back Vent Slot Count | 5 | 1 – 10 |
| Back Slot Length | 400 mm | 100 – 1000 |
| Back Slot Width | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no