Enclosures and housings
Divider Wall
- Bounding box
- 150.0 × 200.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a production-ready injection molded divider wall for a modular storage organizer. Do NOT create a flat plate. The divider wall must closely match the uploaded reference image. Specifications: • Overall size: 200 mm high × 150 mm wide × 3 mm thick • Smooth cosmetic front face • Rear face contains 5 evenly spaced full-height reinforcing ribs • Rib thickness: 1.8 mm • Rib depth: 3 mm • 1.5 mm fillets where ribs meet the wall • 5 mm radius along the entire top edge • Rounded outside corners • Uniform wall thickness • 2° draft on all vertical molded surfaces Connection Features: • Integrated slide rails on both vertical edges • Rails designed to fit matching guide channels in the connector • 45° lead-in chamfers at rail ends • Positive locking groove near the bottom • Positive insertion stop • Two rounded support feet on the bottom Design Goals: • Lightweight • High stiffness • Optimized for injection molding • No unnecessary undercuts • Clean premium appearance • Match the appearance of the original concept render Generate: • Front view • Rear view • Side view • Isometric view • Section view through one slide rail
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 200 mm | 100 – 300 |
| Overall Width | 150 mm | 80 – 250 |
| Overall Thickness (incl. ribs) | 3 mm | 2 – 6 |
| Main Wall Thickness | 1.5 mm | 0.8 – 3 |
| Rib Depth (front to rear) | 3 mm | 1 – 6 |
| Rib Thickness | 1.8 mm | 1 – 3 |
| Number of Ribs | 5 | 3 – 9 |
| Rib Junction Fillet Radius | 1.5 mm | 0.5 – 3 |
| Top Edge Radius | 5 mm | 2 – 10 |
| Outside Corner Radius | 3 mm | 1 – 8 |
| Slide Rail Width | 3 mm | 2 – 6 |
| Rail End Chamfer Size | 1 mm | 0.5 – 3 |
| Support Foot Height | 5 mm | 3 – 10 |
| Locking Groove Depth | 1 mm | 0.5 – 2 |
| Locking Groove Height | 5 mm | 3 – 10 |
| Insertion Stop Groove Depth | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox