Enclosures and housings
Divided Prototype Container with Screw Lid
- Bounding box
- 400 × 250 × 270 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
put the line in the centre with the 2cm gaps for the box part in the other direction (rotation direction 90 degrees and then do line. remove previous line but keep shelf amnd everything the else the same
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width, X | 400 mm | 100 – 600 |
| Outer length, Y | 250 mm | 80 – 400 |
| Outer height / depth, Z | 250 mm | 50 – 500 |
| Wall and floor thickness | 20 mm | 1.2 – 30 |
| Centre divider thickness | 20 mm | 3 – 40 |
| Divider gap width | 20 mm | 5 – 60 |
| Shelf thickness | 25 mm | 3 – 50 |
| Shelf underside height above floor | 125 mm | 20 – 450 |
| Retaining lip width | 10 mm | 2 – 30 |
| Retaining lip height above shelf | 10 mm | 2 – 40 |
| Input/output hole diameter | 30 mm | 5 – 60 |
| Input/output hole centre height | 190 mm | 30 – 480 |
| Lid clearance hole diameter | 3.4 mm | 2 – 6 |
| Screw head counterbore diameter | 6.2 mm | 3 – 12 |
| Screw head counterbore depth | 3.5 mm | 1 – 10 |
| Rim pilot (self-tap) hole diameter | 2.7 mm | 1.5 – 5 |
| Rim pilot hole depth | 18 mm | 5 – 60 |
| Lid thickness | 20 mm | 3 – 40 |
| Lid register height | 8 mm | 2 – 20 |
| Lid register wall width | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,