Enclosures and housings
Divided Prototype Container with Screw Lid
- Bounding box
- 400 × 250 × 270 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Design the following to then be 3D printed: a prototype container with an open top but with screw holes at the top. put line the same height as the outer walls through the middle of the box, then at 1/3 distance either direction from the connecting walls on this line, put a 2 cm gap. the line continues in the middle between 1/3 distance and 2/3 distance of the line. The box is to be 40cm wide, 25 cm long, and 25cm deep. then, cad a lid of 40cmx25cm x 2cm thick with holes at the same dimension as the screw holes of the box for it to be a lid. In one of the half sections inside the box, add a shelf at half height of the box, with the shelf 2.5 cm thick, and under space underneath the shelf. put a small lip of 1 cm to stop objects slipping. the wall thickness if not stated at any point (including floor) to be 2cm thick. create space for inputs and outputs out of the box (on the walls)- total of 8 3cm holes for them.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width, X | 400 mm | 100 – 600 |
| Outer length, Y | 250 mm | 80 – 400 |
| Outer height / depth, Z | 250 mm | 50 – 500 |
| Wall and floor thickness | 20 mm | 1.2 – 30 |
| Centre divider thickness | 20 mm | 3 – 40 |
| Divider gap width | 20 mm | 5 – 60 |
| Shelf thickness | 25 mm | 3 – 50 |
| Shelf underside height above floor | 125 mm | 20 – 450 |
| Retaining lip width | 10 mm | 2 – 30 |
| Retaining lip height above shelf | 10 mm | 2 – 40 |
| Input/output hole diameter | 30 mm | 5 – 60 |
| Input/output hole centre height | 190 mm | 30 – 480 |
| Lid clearance hole diameter | 3.4 mm | 2 – 6 |
| Screw head counterbore diameter | 6.2 mm | 3 – 12 |
| Screw head counterbore depth | 3.5 mm | 1 – 10 |
| Rim pilot (self-tap) hole diameter | 2.7 mm | 1.5 – 5 |
| Rim pilot hole depth | 18 mm | 5 – 60 |
| Lid thickness | 20 mm | 3 – 40 |
| Lid register height | 8 mm | 2 – 20 |
| Lid register wall width | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,