Enclosures and housings
DeWalt 18V XR 1.5Ah – batterihylla V2 öppna spår
- Bounding box
- 324 × 115 × 96 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Revision of build-c83f4f8fd1be. Replaces incorrect solid male attachment with female open-bottom channel, two inward lips, open front and rear stop. Three independent 108mm shelf modules. Reference dimensions 46.4/34.4/5.6/3.4/55mm from DDS measured DeWalt 20V profile, interpreted for female receiver; NOT an OEM DCB181 drawing and no validated fit. Latch pocket placement remains assumed, adjustable. Retains wall holes72x60mm grid12, clearance4.2 for M3.5 screws through user's 4mm board holes with rear nuts/washers. Single-module fit print required.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall pitch | 12 mm | 10 – 14 |
| Printed screw clearance | 4.2 mm | 3.4 – 4.5 |
| Reference wide profile | 46.4 mm | 40 – 60 |
| Reference narrow profile | 34.4 mm | 28 – 44 |
| Upper cavity nominal height | 5.6 mm | 4 – 18 |
| Guide lip thickness | 3.4 mm | 2 – 5 |
| Rail length | 55 mm | 45 – 80 |
| Clearance each side | 0.25 mm | 0.15 – 0.6 |
| Latch window offset | 10 mm | 5 – 25 |
| Latch window width | 14 mm | 8 – 22 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no