Mechanical parts
Desktop Robot Arm
- Bounding box
- 164.5 × 90 × 170.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
i want a robotic arm with randon dimensions
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate diameter | 90 mm | 50 – 140 |
| Base plate height | 12 mm | 6 – 30 |
| Waist bearing diameter | 40 mm | 20 – 70 |
| Base screw hole diameter | 4.5 mm | 2.5 – 8 |
| Base screw circle radius | 34 mm | 20 – 60 |
| Waist collar diameter | 56 mm | 30 – 90 |
| Waist total height | 26 mm | 14 – 50 |
| Waist cap thickness | 6 mm | 3 – 14 |
| Shoulder cheek thickness | 5 mm | 3 – 10 |
| Shoulder axis height | 62 mm | 40 – 120 |
| Upper arm length | 100 mm | 50 – 200 |
| Forearm length | 90 mm | 40 – 180 |
| Upper arm back tilt | 12 deg | 0 – 45 |
| Forearm down tilt | 20 deg | 0 – 60 |
| Link thickness | 12 mm | 6 – 24 |
| Link width | 22 mm | 14 – 40 |
| Joint pin hole diameter | 5.5 mm | 3 – 10 |
| Palm length | 22 mm | 12 – 50 |
| Finger length | 34 mm | 15 – 70 |
| Gap between fingers | 12 mm | 6 – 40 |
| Finger thickness | 5 mm | 3 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
