Enclosures and housings
Desktop Organizer and Phone Stand
- Bounding box
- 180 × 80 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Create a monolithic, 3D printable desktop organizer and phone stand unit measuring 180mm wide, 80mm deep, and 60mm tall. The design features three integrated sections on a single flat rectangular base plate (5mm thickness): 1) On the left, a hollow vertical cylinder with an outer diameter of 50mm, inner diameter of 44mm, and height of 50mm for holding pens. 2) In the center, an angled slot (15mm wide, tilted 15 degrees backward) with a 15mm front retaining lip and an open charging cable cutout at the bottom center. 3) On the right, a rectangular storage box measuring 50mm wide, 60mm deep, and 45mm tall with 3mm wall thickness and rounded inner corners. All bottom surfaces are completely flat with zero overhangs for supportless 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 180 mm | 100 – 260 |
| Overall depth | 80 mm | 50 – 160 |
| Overall height | 60 mm | 40 – 140 |
| Base plate thickness | 5 mm | 3 – 10 |
| Rim around parts | 5 mm | 2 – 15 |
| Outer diameter | 50 mm | 30 – 90 |
| Wall thickness | 3 mm | 1.5 – 10 |
| Height above base | 50 mm | 20 – 120 |
| Slot width | 15 mm | 8 – 30 |
| Backward tilt | 15 deg | 5 – 30 |
| Front lip height | 15 mm | 5 – 40 |
| Front lip thickness | 6 mm | 3 – 12 |
| Back panel thickness | 10 mm | 4 – 20 |
| Cable cutout width | 18 mm | 8 – 40 |
| Cable cutout height | 10 mm | 4 – 20 |
| Box width | 50 mm | 20 – 100 |
| Box depth | 60 mm | 20 – 120 |
| Box height | 45 mm | 10 – 100 |
| Box wall thickness | 3 mm | 1.5 – 10 |
| Inner corner radius | 6 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no