Brackets and mounts
Desktop Companion Gadget Enclosure
- Bounding box
- 92.0 × 62.0 × 38.0 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sleek, compact, and fully 3D-printable enclosure for a desktop companion gadget. The case must fully conceal all internal wiring, sensors, and power management modules while providing targeted cutouts for external interfaces.Component Layout & Cutouts:Front: Center mount for a 0.96-inch OLED display (acting as the screen/face).Left Side: Grille cutout for a 3W speaker.Top: Recessed housing for a TTP223 capacitive touch sensor.Rear: Flush access port cutout for a TP4056 USB charging board.Internal Features:Dedicated compartment for a 902030 LiPo battery ($900\text{ mAh}$, approx. $9 \times 20 \times 30\text{ mm}$).Mount points for a 5V step-up (boost) converter module.Internal mounting cavity for a DHT11 temperature & humidity sensor with subtle ventilation slots.Internal cable channels and standoffs/clips to ensure all loose wires and modules remain securely hidden and organized.Design Style & Print Specs:Modern, rounded-edge aesthetic ("desk buddy" style). Designed for FDM 3D printing in 2–3 snap-fit or screw-together pieces without requiring structural supports inside the display or port cutouts.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (X) | 92 mm | 60 – 160 |
| Body Depth (Y) | 62 mm | 45 – 120 |
| Body Height (Z) | 34 mm | 20 – 80 |
| Wall Thickness | 2.5 mm | 1.6 – 5 |
| Floor Thickness | 4 mm | 2 – 8 |
| Corner Radius | 9 mm | 2 – 20 |
| Lid Thickness | 4 mm | 2 – 8 |
| Cosmetic Edge Fillet | 1 mm | 0.2 – 1.8 |
| OLED Window Width | 24 mm | 10 – 45 |
| OLED Window Height | 14 mm | 6 – 30 |
| OLED Window Centre Height | 19 mm | 8 – 40 |
| USB Port Cutout Width | 12 mm | 6 – 25 |
| USB Port Cutout Height | 7 mm | 3 – 16 |
| USB Port Centre Height | 9 mm | 5 – 25 |
| Grille Centre (Y) | 10 mm | -20 – 20 |
| Grille Centre Height | 18 mm | 8 – 30 |
| Grille Hole Pitch | 5 mm | 3 – 9 |
| Grille Hole Size | 2.4 mm | 1 – 4 |
| Vent Bank Centre (Y) | -12 mm | -25 – 5 |
| Vent Bank Height | 12 mm | 6 – 26 |
| Vent Slot Pitch | 4 mm | 2.5 – 8 |
| Vent Slot Width | 2 mm | 1 – 4 |
| Vent Slot Height | 8 mm | 3 – 16 |
| LiPo Battery Width | 30 mm | 15 – 60 |
| LiPo Battery Depth | 20 mm | 10 – 45 |
| Battery Tray X | 0 mm | -40 – 40 |
| Battery Tray Y | 12 mm | -20 – 30 |
| Battery Tray Depth | 1.6 mm | 0.6 – 2.5 |
| DHT11 Pocket Width | 20 mm | 10 – 35 |
| DHT11 Pocket Depth | 12 mm | 6 – 25 |
| DHT11 Pocket X | 30 mm | -40 – 40 |
| DHT11 Pocket Y | -12 mm | -25 – 25 |
| DHT11 Pocket Depth Z | 2 mm | 0.8 – 3 |
| Boost Module Post X | -24 mm | -40 – 40 |
| Boost Post 1 Y | -14 mm | -25 – 25 |
| Boost Post 2 Y | -2 mm | -25 – 25 |
| Boost Post Diameter | 4.4 mm | 2.5 – 8 |
| Boost Post Height | 5 mm | 2 – 12 |
| Cable Channel Width | 3 mm | 1.5 – 6 |
| Cable Channel Depth | 1.2 mm | 0.4 – 2.5 |
| Screw Boss Inset | 10 mm | 6 – 20 |
| Lid Screw Clearance Dia | 2.8 mm | 1.8 – 4.5 |
| Touch Sensor Recess Width | 18 mm | 8 – 35 |
| Touch Sensor Recess Depth (Y) | 14 mm | 6 – 30 |
| Touch Sensor Recess Y | 14 mm | -25 – 25 |
| Touch Sensor Recess Depth (Z) | 2.5 mm | 0.8 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl