Enclosures and housings
Desk Robot Enclosure Assembly
- Bounding box
- 90.0 × 64.0 × 110.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
I want adesk bot features a primary dark green body accented in orange, housing a main display screen measuring 62 mm wide by 36.5 mm high for the animated face. Positioned below the screen are the ultrasonic sensor—measuring 45 mm left to right and 18.9 mm top to bottom—and the camera module, which has dimensions of 26.5 mm left to right, 38.2 mm top to bottom, a width of 13.9 mm, and an 8.1 mm camera lens. Internally, the enclosure is designed to pack an ESP32 board and a single battery pack, while the rear features a see-through honeycomb pattern grill to display the electronics.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 90 mm | 60 – 120 |
| Body Height | 110 mm | 80 – 150 |
| Body Depth | 60 mm | 40 – 100 |
| Body Wall Thickness | 4 mm | 2 – 8 |
| Accent Strip Height | 6 mm | 2 – 10 |
| Accent Strip Thickness | 2 mm | 1 – 5 |
| Screen Width | 62 mm | 40 – 80 |
| Screen Height | 36.5 mm | 20 – 60 |
| Screen Depth | 3 mm | 1 – 10 |
| Ultrasonic Width | 45 mm | 30 – 60 |
| Ultrasonic Height | 18.9 mm | 10 – 30 |
| Ultrasonic Depth | 4 mm | 1 – 10 |
| Transducer Diameter | 8 mm | 4 – 15 |
| Transducer X Offset | 10 mm | 0 – 25 |
| Camera Module Width | 26.5 mm | 15 – 40 |
| Camera Module Height | 38.2 mm | 25 – 60 |
| Camera Module Depth | 13.9 mm | 5 – 25 |
| Camera Lens Diameter | 8.1 mm | 4 – 15 |
| Lens Protrusion Beyond Front | 2 mm | 0 – 6 |
| ESP32 Width | 25 mm | 10 – 50 |
| ESP32 Length | 50 mm | 20 – 80 |
| ESP32 Thickness | 5 mm | 1 – 10 |
| Battery Width | 40 mm | 20 – 60 |
| Battery Height | 60 mm | 30 – 80 |
| Battery Depth | 10 mm | 5 – 25 |
| Rear Grill Width | 60 mm | 30 – 90 |
| Rear Grill Height | 80 mm | 40 – 100 |
| Grill Thickness | 4 mm | 1 – 6 |
| Honeycomb Hex Diameter | 6 mm | 3 – 12 |
| Honeycomb Bar Width | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no