Enclosures and housings
Desk Nameplate - Nabiel Mamnoen
- Bounding box
- 160 × 32 × 54.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Keep the current design exactly the same as Version 3, matching the reference image as closely as possible. - Name: **Nabiel Mamnoen** - Job title: **HR-adviseur** - Keep the same font style, raised lettering, decorative rectangular border, proportions and angled desk stand. - Do not change the appearance, layout or dimensions unless necessary for print optimization. **Optimize the model to use as little filament as possible and print as quickly as possible on a Creality K1C (0.4 mm nozzle).** - Make the base and back support hollow or use a lightweight reinforced structure instead of solid material. - Use thin but strong walls (approximately 1.2–1.6 mm). - Minimize the thickness of the nameplate while keeping it sturdy. - Reduce unnecessary material in the stand and base without affecting stability. - Keep the letters and decorative border clearly visible and printable. - Design it to print without supports if possible. - Ensure everything remains one connected, watertight solid suitable for STL export. - Prioritize low filament consumption, short printing time and sufficient structural strength. **Important: The finished nameplate must look visually identical to the current design. Only optimize the internal structure and unnecessary material to reduce printing time and filament use.**
Parameters
| Name | Value | Range |
|---|---|---|
| Width of the nameplate | 150 mm | 80 – 260 |
| Height of the nameplate | 55 mm | 30 – 90 |
| Plate wall thickness | 1.6 mm | 1.2 – 4 |
| Backward lean of the plate | 18 deg | 0 – 35 |
| Name letter height | 14 mm | 8 – 26 |
| Job title letter height | 8 mm | 4 – 16 |
| Name height on the plate | 36 mm | 10 – 80 |
| Job title height on the plate | 20 mm | 5 – 70 |
| Raised letter height | 0.9 mm | 0.6 – 2 |
| Distance of the border from the plate edge | 5.5 mm | 2 – 12 |
| Border line width | 2.5 mm | 1 – 6 |
| Border centre height on the plate | 29 mm | 5 – 70 |
| Border height | 0.9 mm | 0.6 – 2 |
| Base extension beyond the plate sides | 5 mm | 0 – 20 |
| Base depth front to back | 32 mm | 18 – 60 |
| Base lip in front of the plate | 8 mm | 3 – 20 |
| Base height | 6 mm | 4 – 14 |
| Wall thickness | 1.6 mm | 1.2 – 3 |
| Base floor thickness | 1.6 mm | 1.2 – 4 |
| Internal reinforcing ribs | 3 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no