Enclosures and housings
DAC Enclosure with Lid
- Bounding box
- 72.0 × 115.0 × 26.5 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Add a separate matching enclosure lid part to the workspace. Lid is a flat rectangular plate measuring 72.0mm width x 115.0mm length x 2.5mm thickness. Outer vertical edge corner fillets are 3.0mm to perfectly mirror the base chassis. Modify the four internal corner standoff pins on the base chassis to be 4.0mm deep pocket holes threaded for M2.5 metric screws. Drill four matching 2.5mm countersunk screw holes through the perimeter corners of the flat lid plate, aligned exactly to the centers of the base chassis standoff pins, allowing the lid to sit perfectly flush and secure to the top face of the main housing sled.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall X | 72 mm | 40 – 150 |
| Overall Y | 115 mm | 40 – 200 |
| Overall Z | 24 mm | 10 – 60 |
| Side Wall Thickness | 2.5 mm | 1 – 6 |
| Front Wall Thickness | 2.5 mm | 1 – 6 |
| Rear Wall Thickness | 2.5 mm | 1 – 6 |
| Floor Thickness | 2.5 mm | 1 – 6 |
| Baffle Y Position | 75 mm | 10 – 110 |
| Baffle Thickness | 2.5 mm | 1 – 6 |
| PCB Pattern Center X | 36 mm | 10 – 65 |
| PCB Pattern Center Y | 94 mm | 10 – 110 |
| PCB Pattern Radius | 9 mm | 4 – 30 |
| Standoff OD | 5 mm | 3 – 10 |
| Standoff Tap Drill Diameter | 2.05 mm | 1.5 – 4 |
| Standoff Height | 6 mm | 4 – 20 |
| Standoff Thread Pocket Depth | 4 mm | 2 – 10 |
| Volume Shaft Cutout X | 52 mm | 0 – 70 |
| Volume Shaft Cutout Z | 12 mm | 0 – 22 |
| Volume Shaft Cutout Radius | 4 mm | 1 – 8 |
| Volume Counterbore Radius | 11 mm | 5 – 20 |
| Volume Counterbore Depth | 3 mm | 0.5 – 8 |
| Toggle Cutout X | 14 mm | 0 – 70 |
| Toggle Cutout Z | 7 mm | 0 – 22 |
| Toggle Cutout Radius | 3.18 mm | 1 – 8 |
| Window X1 | 6 mm | 0 – 70 |
| Window X2 | 34 mm | 0 – 70 |
| Window Z1 | 13 mm | 0 – 22 |
| Window Z2 | 21 mm | 0 – 22 |
| Window Chamfer | 0.5 mm | 0 – 1.5 |
| Rear Slot 1 X | 16 mm | 0 – 70 |
| Rear Slot 2 X | 32 mm | 0 – 70 |
| Rear Slot Z | 12 mm | 0 – 22 |
| Rear Slot Length X | 9.4 mm | 2 – 20 |
| Rear Slot Length Z | 3.7 mm | 1 – 10 |
| Rear Circle X | 54 mm | 0 – 70 |
| Rear Circle Z | 12 mm | 0 – 22 |
| Rear Circle Radius | 5.1 mm | 1 – 12 |
| Channel 1 X | 20 mm | 0 – 70 |
| Channel 2 X | 45 mm | 0 – 70 |
| Channel Start Y | 10 mm | 0 – 110 |
| Channel End Y | 70 mm | 0 – 110 |
| Channel Width | 3 mm | 1 – 8 |
| Channel Depth | 3 mm | 0.5 – 6 |
| Lid Thickness | 2.5 mm | 1 – 6 |
| Lid Corner Fillet Radius | 3 mm | 0 – 6 |
| Lid Screw Hole Diameter | 2.5 mm | 1.5 – 4 |
| Lid Countersink Diameter | 5.5 mm | 3 – 10 |
| Lid Countersink Angle | 90 deg | 60 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no