Enclosures and housings
D455 Protective Housing with Marker Rods
- Bounding box
- 124.8 × 32.8 × 60.8 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D-printable protective housing for an Intel RealSense D455. **Camera reference dimensions:** 124 × 26 × 29 mm (L × D × H). Design the housing around these dimensions with approximately 0.3–0.5 mm clearance per side and 2–3 mm wall thickness. Keep the front camera lenses/sensors completely unobstructed and provide rear access for the USB-C connector. ### Qualisys marker rods Add multiple vertical rods on the **top surface** of the housing. * Distribute them **asymmetrically and irregularly across the entire top surface**. * No grid, symmetry, equal spacing, or mirrored pattern. * Rod diameter: **exactly Ø4.00 mm**. * Every rod must have the same geometry. * The **top 10 mm of every rod must taper linearly from Ø4.00 mm to Ø3.80 mm**. * The taper must be straight and continuous, not rounded or stepped. * All rods must be firmly integrated into the housing as one watertight solid. Prioritize dimensional accuracy and manufacturability. The camera dimensions and rod dimensions are hard constraints and must not be approximated.
Parameters
| Name | Value | Range |
|---|---|---|
| Camera Length | 124 mm | 100 – 180 |
| Camera Depth | 26 mm | 20 – 50 |
| Camera Height | 29 mm | 20 – 50 |
| Clearance Per Side | 0.4 mm | 0.3 – 0.5 |
| Wall Thickness | 3 mm | 2 – 3 |
| Rod Diameter | 4 mm | 4 – 4 |
| Rod Taper Top Diameter | 3.8 mm | 3.8 – 3.8 |
| Rod Taper Length | 10 mm | 10 – 10 |
| Rod Total Height | 25 mm | 15 – 50 |
| Rod Count | 12 count | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no