Enclosures and housings
D-Shaped Robotic Chassis
- Bounding box
- 240 × 260 × 90 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric D-shaped robotic chassis with a total width of 240 mm, a total length of 260 mm, and a height of 90 mm. Start on the XY plane by drawing a 240 mm flat front edge, straight side walls extending 140 mm backward, and closing with a rear circular arc to reach a total length of 260 mm. Extrude this profile upward by 90 mm, and shell the geometry with a 3 mm wall thickness, leaving a solid 3 mm bottom floor plate and a completely open top.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width across the flat front edge | 240 mm | 60 – 400 |
| Straight side-wall length behind the front edge | 140 mm | 20 – 400 |
| Overall chassis height | 90 mm | 20 – 300 |
| Side / rear wall thickness | 3 mm | 1.2 – 10 |
| Solid bottom floor plate thickness | 3 mm | 1.2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,