Enclosures and housings
Cylindrical Pool Skimmer Basket
- Bounding box
- 145 × 145 × 120.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable cylindrical pool skimmer basket. Total height 120.57 mm. Base outer diameter 87.5 mm. Top opening inner diameter 130 mm, top lip outer diameter 145 mm with 4 mm lip thickness. Add a solid central vertical cylindrical handle 22 mm diameter connected to the floor. Keep the top 15 mm of the basket wall completely solid. Pattern circular drainage holes radially around the wall: 2.5 mm holes at the upper section, 3.5 mm holes in the middle, and 4.5 mm holes near the bottom. Export as STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Total height | 120.57 mm | 100 – 200 |
| Base outer diameter | 87.5 mm | 50 – 150 |
| Top opening inner diameter | 130 mm | 80 – 200 |
| Top lip outer diameter | 145 mm | 80 – 220 |
| Lip thickness | 4 mm | 1 – 10 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Floor thickness | 3 mm | 1 – 10 |
| Handle diameter | 22 mm | 8 – 50 |
| Solid wall height below top | 15 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,