Brackets and mounts
Cylindrical Electronics Enclosure
- Bounding box
- 44.0 × 44.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a cylindrical electronics enclosure housing with a 44 mm outer diameter, 40 mm inner diameter, 16 mm total height, and 2 mm wall and top thickness. Inside the inner cavity, create two stacked rectangular PCB mounting slots centered horizontally: a lower pocket measuring 23 mm by 18.5 mm by 4.5 mm deep against the inside top face, followed by a 1.5 mm tall internal shelf step, and an upper pocket measuring 28.5 mm by 24 mm by 5.5 mm deep toward the open bottom. Cut a 9.5 mm wide by 4 mm tall rounded rectangular USB-C port opening through the side wall aligned with the lower PCB pocket. Add six 2 mm diameter ventilation holes arranged in a 24 mm diameter circle on the top face. Add a 0.6 mm deep by 1 mm high internal snap-fit groove around the inside rim of the open bottom, and apply a 1 mm chamfer to the outer top edge.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 44 mm | 20 – 100 |
| Inner Diameter | 40 mm | 16 – 96 |
| Total Height | 16 mm | 6 – 60 |
| Top Thickness | 2 mm | 0.8 – 8 |
| Lower Pocket Width | 23 mm | 5 – 60 |
| Lower Pocket Length | 18.5 mm | 5 – 60 |
| Lower Pocket Depth | 4.5 mm | 0.5 – 20 |
| Shelf Step Width | 25.75 mm | 5 – 70 |
| Shelf Step Length | 21.25 mm | 5 – 70 |
| Shelf Step Height | 1.5 mm | 0.2 – 8 |
| Upper Pocket Width | 28.5 mm | 5 – 80 |
| Upper Pocket Length | 24 mm | 5 – 80 |
| Upper Pocket Depth | 5.5 mm | 0.5 – 25 |
| USB-C Opening Width | 9.5 mm | 4 – 24 |
| USB-C Opening Height | 4 mm | 1.5 – 16 |
| USB-C Corner Radius | 1.5 mm | 0.2 – 4 |
| Vent Hole Diameter | 2 mm | 0.5 – 8 |
| Vent Hole Count | 6 pcs | 1 – 12 |
| Vent Bolt-Circle Diameter | 24 mm | 4 – 40 |
| Snap Groove Depth | 0.6 mm | 0.1 – 2 |
| Snap Groove Height | 1 mm | 0.3 – 5 |
| Groove Height Above Bottom | 1 mm | 0.2 – 8 |
| Outer Top Chamfer | 1 mm | 0.1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
