Brackets and mounts
Cyber Tech ESP32P4 Enclosure
- Bounding box
- 108 × 78 × 36 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a futuristic, aggressive, premium-looking 3D-printable enclosure for my JC-ESP32P4-M3-DEV development board. REFERENCE LINKS: Official board repository: https://github.com/microrobotics/JC-ESP32P4-M3-DEV Official board dimensions PDF: https://github.com/microrobotics/JC-ESP32P4-M3-DEV/blob/main/JC-ESP32P4-M3-DEV-dimensions.pdf MECHANICAL ACCURACY IS THE TOP PRIORITY: - Design specifically around the JC-ESP32P4-M3-DEV board. - Board dimensions are approximately 92 × 62 mm. - Preserve the correct board orientation and original mounting-hole positions. - Use the reference documentation and any uploaded board images to determine component and connector positions. - Do not guess connector positions or invent measurements. - Leave enough internal clearance for every component. - Make sure the PCB fits securely without bending or being squeezed. ACCESS AND FUNCTIONALITY: - Provide correctly positioned openings for all three USB-C ports. - Provide access to the Ethernet port. - Keep GPIO headers accessible. - Provide access to the microSD/TF card slot. - Keep BOOT and RESET buttons accessible. - Preserve access to all other actual external connectors. - Do not create openings for the two long black connectors on top of the board. FUTURISTIC EXTERIOR DESIGN: Create an aggressive sci-fi cyber-tech appearance, inspired by futuristic military electronics and advanced computer hardware. - All-black design. - Large raised or recessed hexagonal honeycomb pattern across the lid. - Angular armour plates and layered geometric surfaces. - Deep recessed channels and futuristic panel lines. - Sharp bevelled edges and sculpted corners. - Detailed corner screw surrounds. - Symmetrical mechanical-looking details. - Make it look like a miniature advanced piece of technology, not a plain rectangular box. CONSTRUCTION: - Two-piece enclosure: main body and removable lid. - Four corner screw bosses. - Smooth cylindrical M3 heat-set insert cavities, without printed threads. - Secure internal PCB supports. - Strong walls and a practical 3D-printable structure. - Avoid fragile details and unsupported overhangs. FINAL REQUIREMENT: The finished case must look extremely futuristic while still fitting the real JC-ESP32P4-M3-DEV board and keeping its ports usable. Mechanical accuracy comes before decoration. Do not sacrifice fit or functionality for appearance. Produce a complete 3D-printable enclosure, not just a concept model.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length X | 108 mm | 80 – 160 |
| Body width Y | 78 mm | 60 – 120 |
| Body height | 22 mm | 12 – 40 |
| Wall/bottom thickness | 3 mm | 1.5 – 6 |
| Lid height | 14 mm | 6 – 30 |
| PCB length X | 92 mm | 70 – 130 |
| PCB width Y | 62 mm | 40 – 100 |
| PCB support height above floor | 6 mm | 3 – 12 |
| M3 screw clearance hole | 3.4 mm | 2.5 – 5.5 |
| M3 heat-set insert hole diameter | 4 mm | 3.2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o