Brackets and mounts
Custom Cylindrical PC Case Assembly
- Bounding box
- 300 × 300 × 350 mm
- Engine
- 3D Printing B-rep
- Parameters
- 39
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Case Shell: Create a hollow cylindrical enclosure, 300 mm outer diameter, 350 mm height, 4 mm wall thickness, open at the top and bottom. Include the following cutouts on the outer wall: on the rear face, a 170 mm × 170 mm rectangular opening for an I/O shield centred at 150 mm from the bottom; on the front face, two 14 mm × 7 mm rectangular cutouts for USB-A ports spaced 30 mm apart and one 9 mm × 3 mm rectangular cutout for USB-C below them, all centred at 100 mm from the bottom. Add 2 mm chamfers to the top and bottom outer edges. Motherboard Mounting Plate: Create a 170 mm × 170 mm × 3 mm flat plate with four 3.2 mm diameter through holes at positions (25 mm, 25 mm), (25 mm, 145 mm), (145 mm, 25 mm), and (145 mm, 145 mm) measured from the bottom-left corner. Add four 6 mm diameter × 5 mm deep counterbores on the top face at the same positions for M3 heat inserts. SFX-L PSU Bracket: Create a 125 mm × 63.5 mm × 3 mm flat mounting plate with four 3.2 mm diameter through holes at positions (6 mm, 57.5 mm), (119 mm, 57.5 mm), (119 mm, 6 mm), and (6 mm, 6 mm) measured from the bottom-left corner. Add four 6 mm diameter × 5 mm deep counterbores on the top face at the same positions. Fan Mount Ring: Create a flat ring (annular plate) with 180 mm outer diameter, 155 mm inner diameter, and 3 mm thickness, with four 3.2 mm diameter through holes on a 165 mm × 165 mm square pattern centred on the ring. GPU Bracket/Riser Mount: Create a 138 mm × 54 mm × 3 mm mounting plate with four 3.2 mm diameter through holes 10 mm in from each edge, and a 210 mm × 10 mm × 3 mm extension tab on one long edge with two 3.2 mm holes for a PCIe riser connection.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 300 mm | 100 – 400 |
| Height | 350 mm | 100 – 600 |
| Wall thickness | 4 mm | 2 – 10 |
| Top/bottom outer chamfer | 2 mm | 0 – 5 |
| Rear I/O opening size | 170 mm | 50 – 250 |
| Rear I/O opening center height | 150 mm | 0 – 400 |
| USB-A cutout width | 14 mm | 5 – 30 |
| USB-A cutout height | 7 mm | 3 – 20 |
| USB-A center spacing | 30 mm | 10 – 80 |
| USB-A center height | 101 mm | 0 – 400 |
| USB-C cutout width | 9 mm | 3 – 20 |
| USB-C cutout height | 3 mm | 1.5 – 10 |
| USB-C center height | 93.5 mm | 0 – 400 |
| Plate thickness | 3 mm | 1 – 6 |
| Motherboard plate width | 170 mm | 50 – 250 |
| Motherboard plate height | 170 mm | 50 – 250 |
| Motherboard plate center height | 150 mm | 0 – 350 |
| Motherboard plate inset from inner rear wall | 10 mm | 3 – 30 |
| PSU bracket width | 125 mm | 50 – 200 |
| PSU bracket depth | 63.5 mm | 30 – 120 |
| PSU bracket center height | 40 mm | 0 – 200 |
| Fan ring outer diameter | 180 mm | 80 – 250 |
| Fan ring inner diameter | 155 mm | 50 – 230 |
| Fan ring center height | 330 mm | 100 – 400 |
| Fan hole center spacing | 165 mm | 50 – 220 |
| Fan support arm width | 8 mm | 3 – 20 |
| GPU bracket depth along Y | 138 mm | 40 – 250 |
| GPU bracket height | 54 mm | 20 – 150 |
| GPU bracket center height | 150 mm | 0 – 350 |
| GPU bracket center Y offset | 30 mm | -100 – 100 |
| Riser tab length | 210 mm | 50 – 300 |
| Riser tab width | 10 mm | 4 – 30 |
| Riser tab hole spacing | 140 mm | 20 – 200 |
| M3 clearance hole diameter | 3.2 mm | 2 – 6 |
| M3 counterbore diameter | 6 mm | 4 – 12 |
| M3 counterbore depth | 5 mm | 1 – 10 |
| Counterbore boss diameter | 10 mm | 6 – 20 |
| Counterbore boss height | 3 mm | 0 – 8 |
| Motherboard standoff diameter | 8 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
