Enclosures and housings
Custodia serpenti — stampa 45° con supporto a distacco
- Bounding box
- 48.4 × 134.9 × 134.6 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Custodia R4 con linguetta protetta e libera, tre serpenti a bassorilievo0.45 mm su retro e bande frontali. Orientata45° con sostegno sacrificabile a due pareti alleggerite, base comune, punti di contatto ridotti e traversa di avvio sotto il bordo più basso. Supporto distinto per rimozione; contatti fuori da linguetta e decorazione centrale. Assemblaggio CAD verificato per solidi collegati e contatto supporto-custodia; distacco e supporti locali da verificare nello slicer e con prova PETG.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza telecomando | 39 mm | 20 – 80 |
| Lunghezza telecomando | 160 mm | 60 – 250 |
| Spessore telecomando | 7 mm | 3 – 25 |
| Gioco per lato | 0.3 mm | 0.1 – 1 |
| Gioco verticale | 0.4 mm | 0.1 – 1.5 |
| Gioco longitudinale | 0.5 mm | 0.1 – 2 |
| Pareti laterali | 2.4 mm | 1.6 – 4 |
| Parete di arresto | 3 mm | 2 – 5 |
| Spessore base | 2 mm | 1.2 – 3 |
| Spessore bordi superiori | 2 mm | 1.2 – 3 |
| Bordo superiore per lato | 6 mm | 3 – 9 |
| Raggio angoli esterni | 3 mm | 1 – 5 |
| Raggio apertura superiore | 6 mm | 2 – 9 |
| Bordo superiore in fondo | 4 mm | 2 – 8 |
| Lunghezza invito | 8 mm | 4 – 14 |
| Allargamento invito per lato | 2 mm | 1 – 3 |
| Raccordo bordi superiori | 0.6 mm | 0.2 – 0.7 |
| Raggio profilo laterale telecomando | 4 mm | 4 – 12 |
| Lunghezza tratto elastico | 24 mm | 18 – 32 |
| Larghezza linguetta | 8 mm | 6 – 12 |
| Spessore linguetta | 1.2 mm | 0.8 – 1.6 |
| Luce fessure laterali | 1.2 mm | 0.8 – 1.8 |
| Sporgenza per sblocco | 6 mm | 4 – 9 |
| Altezza dentino sopra base | 1.6 mm | 1 – 2 |
| Posizione arresto da imbocco | 0.7 mm | 0 – 1 |
| Spessore cornice frontale | 2.4 mm | 2 – 4 |
| Luce davanti alla linguetta | 1.2 mm | 0.8 – 2 |
| Altezza rilievo serpenti | 0.45 mm | 0.3 – 0.8 |
| Lunghezza serpenti | 95 mm | 60 – 110 |
| Ampiezza serpente posteriore | 5 mm | 3 – 7 |
| Larghezza tratto posteriore | 2.4 mm | 1.6 – 3 |
| Larghezza tratto bande | 1.1 mm | 0.8 – 1.4 |
| Ondulazioni serpenti | 2 count | 1 – 3 |
| Inclinazione stampa | 45 deg | 40 – 50 |
| Altezza iniziale da piano | 6 mm | 4 – 10 |
| Spessore pareti supporto | 1.2 mm | 0.8 – 1.6 |
| Spessore base supporto | 1.2 mm | 0.8 – 2 |
| Scarico tra parete e custodia | 0.4 mm | 0.25 – 0.6 |
| Larghezza punti a rottura | 0.5 mm | 0.4 – 0.8 |
| Lunghezza punti a rottura | 1.2 mm | 0.8 – 2 |
| Passo punti a rottura | 12 mm | 8 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
