Brackets and mounts
Curved Wrist Mount with Guide Rail Housing
- Bounding box
- 46.8 × 75.0 × 31.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
A low-profile, mechanical wrist mount for a web-shooter mechanism, optimized for additive manufacturing. The part consists of a curved base plate with a 35mm inner radius to conform to a human wrist, measuring 75mm in length and 45mm in width. The sides of the base plate feature integrated 20mm wide horizontal slots for velcro strap attachments. Centered on the top surface is a rigid, rectangular guide rail system with a hollow central channel designed to house a mini gas canister or mechanical compression spring. The front of the housing terminates in a reinforced bulkhead with a pre-drilled 4mm guide hole for the nozzle interface. The entire model must be solid, manifold, and free of self-intersections for direct engineering assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Wrist Inner Radius | 35 mm | 20 – 70 |
| Plate Thickness | 4 mm | 2 – 10 |
| Plate Length (axial) | 75 mm | 40 – 120 |
| Plate Width (arc) | 45 mm | 20 – 100 |
| Strap Slot Width (axial) | 20 mm | 8 – 35 |
| Strap Slot Opening (arc) | 6 mm | 2 – 14 |
| Slots per Side | 2 pcs | 1 – 3 |
| Slot Pitch (axial) | 35 mm | 15 – 60 |
| Slot Angular Position | 26 deg | 5 – 35 |
| Housing Length | 55 mm | 30 – 70 |
| Housing Width | 24 mm | 14 – 40 |
| Housing Height | 20 mm | 10 – 35 |
| Housing Embed Depth | 3 mm | 0.5 – 6 |
| Canister Bore Diameter | 11 mm | 5 – 20 |
| Bore Axis Height from Block Bottom | 11.5 mm | 6 – 20 |
| Front Bulkhead Thickness | 7.5 mm | 3 – 15 |
| Nozzle Boss Diameter | 10 mm | 5 – 20 |
| Nozzle Boss Length | 2 mm | 0.5 – 8 |
| Guide Hole Diameter | 4 mm | 1 – 10 |
| Rail Width | 4 mm | 2 – 10 |
| Rail Height | 3 mm | 0.5 – 10 |
| Rail Center Spacing | 18 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o