Enclosures and housings
Curved Wrist Band
- Bounding box
- 66.5 × 71.3 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a curved wrist band body as one continuous solid. Overall developed length: 180 mm. Band width: 20 mm. Band thickness: 2.5 mm. Centerline bend radius: 34.4 mm. Arc angle: 300 degrees. Rectangular cross-section with rounded outer edges. Leave the 60 degree opening between the two ends. Add 1 mm fillets to the outer longitudinal edges. Do not add any clasp, electronics, holes, buttons, textures, or decorative features. The result must be one continuous watertight solid suitable for STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Centerline Bend Radius | 34.4 mm | 10 – 120 |
| Band Width | 20 mm | 5 – 60 |
| Band Thickness | 2.5 mm | 0.8 – 10 |
| Arc Angle (gap = 360 - this) | 300 deg | 90 – 359 |
| Outer Edge Fillet Radius | 1 mm | 0 – 1.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w