Enclosures and housings
Curved Three-Post Bracket with Inclined Arms
- Bounding box
- 41.4 × 108.8 × 45 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
. Modela una base curva continua y respeta su contorno y espesor según el plano. 3. Incorpora tres soportes cilíndricos en las posiciones y alturas mostradas, unidos al cuerpo principal. 4. Construye dos brazos inclinados con la orientación, sección y conexión que indiquen las vistas. 5. Realiza todas las perforaciones visibles; verifica su alineación, posición y correspondencia entre vistas. 6. Conserva los diferentes niveles, superficies de transición, curvaturas y proporciones; no agregues detalles que no aparezcan en la referencia. 7. Trabaja con operaciones de modelado sólidas y geometría cerrada. Si una medida no se distingue, no la inventes y señálala para revisión.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer radius of the curved band | 60 mm | 30 – 120 |
| Radial width of the curved band | 16 mm | 6 – 30 |
| Base plate height | 8 mm | 3 – 20 |
| Arc span of the base | 130 deg | 60 – 180 |
| Mounting hole diameter in the base | 4.5 mm | 2 – 10 |
| Angular position of the mounting holes | 25 deg | 5 – 80 |
| Cylindrical support diameter | 12 mm | 6 – 30 |
| Centre support height above the base | 36 mm | 10 – 80 |
| Side support height above the base | 16 mm | 5 – 60 |
| Side supports angular position | 50 deg | 20 – 70 |
| 45 deg root fillet at the supports | 1.5 mm | 0.5 – 4 |
| Arm plate thickness | 6 mm | 3 – 15 |
| Arm end pad diameter | 20 mm | 12 – 40 |
| Through hole diameter in each arm | 5.5 mm | 2 – 12 |
| Radial overlap of arm end with centre support | 2 mm | 0.5 – 5 |
| Depth of the socket over the side support | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
