Brackets and mounts
Curved Bread Knife Blade Guard
- Bounding box
- 116.6 × 160.5 × 9.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple curved protective blade guard for the bow-style bread knife shown in the reference image. Design a single-piece, curved U-shaped protective channel that follows the approximate curve of the exposed serrated blade. Requirements: - Enclose the entire cutting edge. - Leave clearance so the blade does not touch the plastic. - Rounded exterior edges. - 2.4 mm minimum wall thickness. - Suitable for FDM 3D printing with PETG. - Make the length, width, depth, and curvature adjustable. - Use placeholder dimensions because the actual knife is not available for measurement. Generate a valid solid CAD model with a 3D preview and STL export. This is an experimental prototype, not a verified safety sheath.
Parameters
| Name | Value | Range |
|---|---|---|
| Length along the curved blade | 180 mm | 120 – 300 |
| Blade height from edge to spine | 28 mm | 15 – 60 |
| Blade thickness | 2 mm | 0.5 – 4 |
| Radius of blade curvature | 160 mm | 100 – 400 |
| Clearance around blade | 1.5 mm | 0.5 – 4 |
| Guard wall thickness | 2.4 mm | 2.4 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
