Enclosures and housings
Curved-Arm Praline Cup Holder
- Bounding box
- 136.0 × 50.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model. Keep the cylinder and its base. IMPORTANT: The chocolate cup must NOT be a separate object floating beside the cylinder. Create one continuous, solid, connected structure: Keep the cylinder upright. Add a curved arm attached directly to the upper side of the cylinder, below the top. Extend the arm sideways and slightly upward. Attach the circular chocolate cup to the far end of this arm. The cup must be approximately 40 mm in diameter and have a shallow 5 mm recess. Add three small spherical bubbles along the arm. Make sure the arm connects both to the cylinder and to the cup with solid overlapping geometry. Do not create any disconnected or floating parts. Use millimeters and make the model suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Cylinder Diameter | 40 mm | 20 – 100 |
| Cylinder Height | 80 mm | 30 – 250 |
| Base Diameter | 50 mm | 20 – 150 |
| Base Thickness | 5 mm | 2 – 30 |
| Top Valve Diameter | 18 mm | 4 – 60 |
| Top Valve Height | 10 mm | 2 – 50 |
| Arm Thickness | 6 mm | 3 – 16 |
| Arm Start X (inside body) | 15 mm | 0 – 40 |
| Arm Start Height | 40 mm | 2 – 200 |
| Arm Bend Start Height | 65 mm | 3 – 220 |
| Arm Bend Radius | 15 mm | 5 – 60 |
| Arm Bend End X | 30 mm | 5 – 90 |
| Arm Bend End Height | 80 mm | 3 – 240 |
| Arm End X (cup side) | 76 mm | 20 – 180 |
| Arm End Height | 80 mm | 3 – 240 |
| Bubble 1 Diameter | 9 mm | 2 – 30 |
| Bubble 1 Position X | 38 mm | 0 – 200 |
| Bubble 2 Diameter | 12 mm | 2 – 30 |
| Bubble 2 Position X | 51 mm | 0 – 200 |
| Bubble 3 Diameter | 15 mm | 2 – 30 |
| Bubble 3 Position X | 62 mm | 0 – 200 |
| Cup Diameter | 40 mm | 15 – 90 |
| Cup Recess Depth | 5 mm | 1 – 25 |
| Cup Floor Thickness | 8 mm | 3 – 30 |
| Cup Wall Thickness | 2 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no