Mechanical parts
Crossbow Bolt Slot Jig
- Bounding box
- 214.1 × 72 × 32 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Give in extended base with holes for screwing down to wooden surface
Parameters
| Name | Value | Range |
|---|---|---|
| Bolt length | 165.1 mm | 100 – 200 |
| Bolt diameter | 6.5 mm | 4 – 10 |
| Sliding clearance | 0.3 mm | 0.1 – 0.6 |
| Jig width | 42 mm | 25 – 70 |
| Jig height | 28 mm | 20 – 50 |
| Bolt centerline height | 18 mm | 10 – 40 |
| End stop thickness | 3 mm | 2 – 6 |
| Extra length beyond bolt | 16 mm | 5 – 50 |
| Slot distance from bolt end | 20 mm | 5 – 80 |
| Router slot length across bolt | 14 mm | 6 – 40 |
| Router bit diameter | 3.2 mm | 1 – 8 |
| Guide plate width along bolt | 24 mm | 12 – 50 |
| Hold-down bridge width | 8 mm | 4 – 20 |
| Guide/bridge thickness above body | 4 mm | 2 – 10 |
| Number of hold-down bridges | 3 mm | 1 – 6 |
| Base extension beyond jig body | 15 mm | 4 – 40 |
| Base plate thickness | 6 mm | 3 – 12 |
| Base corner radius | 6 mm | 0 – 20 |
| Screw clearance hole dia | 4.5 mm | 2.5 – 6 |
| Countersink head dia | 8 mm | 5 – 14 |
| Screw hole inset from base edge | 10 mm | 4 – 20 |
| Screw holes per side | 3 mm | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
