Brackets and mounts
CRAMP rear chamber extension with body flange
- Bounding box
- 240.0 × 223.0 × 87.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Bolt-on rear extension for the chassis body only. The plate begins flush at the back edge of the original chassis body (no overlap across the component deck). A vertical rear-interface flange and triangular underside gussets support the extension. Four aligned mounting holes attach to the rear body wall. Four perimeter rails retain the separate Xiaomi filter chamber while leaving its underside open.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis body width | 240 mm | 200 – 260 |
| Extension length | 215 mm | 180 – 250 |
| Extension plate thickness | 8 mm | 5 – 15 |
| Chamber footprint width | 204.8 mm | 190 – 215 |
| Chamber footprint depth | 204.8 mm | 190 – 215 |
| Perimeter clearance | 3 mm | 1 – 8 |
| Retaining rail height | 18 mm | 10 – 30 |
| Retaining rail thickness | 4 mm | 3 – 8 |
| Body interface flange thickness | 8 mm | 5 – 12 |
| Body interface flange height | 55 mm | 40 – 75 |
| Mounting hole diameter | 6.5 mm | 5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
