Brackets and mounts
CRAMP Approximate Widened Chassis and Filter Mount
- Bounding box
- 270.0 × 246.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Approximate rebuild of the CRAMP chassis based on remembered dimensions because original STEP geometry is unavailable. Symmetrically widened deck, rear-center locating ring sized for approximately 204.8 mm chamber outer envelope, and relocated PMS5003 mounting plate. Generic slots and support spacers are placeholders, not exact reproductions of original chassis features.
Parameters
| Name | Value | Range |
|---|---|---|
| Widened chassis width | 270 mm | 250 – 320 |
| Chassis length | 246 mm | 220 – 280 |
| Deck thickness | 8 mm | 5 – 15 |
| Chamber outer diameter | 204.8 mm | 200 – 210 |
| Chamber radial clearance allowance | 3 mm | 1 – 8 |
| Locating ring wall | 6 mm | 4 – 12 |
| Locating ring thickness | 6 mm | 4 – 12 |
| Chamber center Y (rear negative) | -12 mm | -30 – 10 |
| PMS5003 mount width | 45 mm | 35 – 60 |
| PMS5003 mount length | 32 mm | 25 – 50 |
| PMS5003 mount thickness | 4 mm | 3 – 8 |
| Generic deck slot length | 22 mm | 15 – 35 |
| Generic deck slot width | 5 mm | 4 – 8 |
| Front slot inset | 24 mm | 18 – 35 |
| Support spacer width | 18 mm | 12 – 25 |
| Support spacer height | 12 mm | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
