Enclosures and housings
Corner Radius End Mill DC12 R5 (Round Nose)
- Bounding box
- 12 × 12 × 75 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
2D front view engineering drawing of solid carbide corner radius end mill (round nose end mill), metric system. Cutting diameter DC=12 mm, corner radius RE=5 mm, shank diameter DCON=12 mm, flute length APMX=35 mm, overall length OAL=75 mm. No internal coolant hole. Add simple schematic spiral flute lines on the cutting section, only for visual representation, DO NOT make precise flute geometry, do not calculate core thickness or helix angle strictly. Keep drawing clean, fully dimensioned: φ12 cutting diameter, R5 corner radius, φ12 shank, flute length 35mm, overall length 75mm. Simple title block. Add note on drawing: FOR QUOTATION ONLY, NOT FOR MANUFACTURING. Output clean 2D DXF file.
Parameters
| Name | Value | Range |
|---|---|---|
| Cutting diameter DC | 12 mm | 3 – 25 |
| Corner radius RE | 5 mm | 0.5 – 8 |
| Shank diameter DCON | 12 mm | 3 – 25 |
| Flute length APMX | 35 mm | 5 – 120 |
| Overall length OAL | 75 mm | 20 – 200 |
| Number of flutes | 4 mm | 2 – 8 |
| Helix twist over flute length | 200 deg | 40 – 400 |
| Radial flute depth | 1.8 mm | 0.2 – 4 |
| Flute width | 2.6 mm | 0.6 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,