Brackets and mounts
Conventional Fixed-Wing Aircraft Exploded Parts
- Bounding box
- 1142.0 × 450.0 × 63.0 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a lightweight, 3D-printable conventional fixed-wing aircraft matching the attached reference image, with a straight wing, slender fuselage, horizontal tail and vertical stabilizer. Dimensions: 450 mm wingspan, 280 mm fuselage length, 80 mm wing chord. Include an adjustable CG mounting bracket for a horizontal pivot shaft parallel to the wingspan. Make the wings, fuselage and tail separate printable parts. Export as STEP and STL for Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 200 mm | 100 – 500 |
| Fuselage Length | 280 mm | 180 – 400 |
| Fuselage Width | 25 mm | 10 – 50 |
| Fuselage Height | 25 mm | 10 – 50 |
| Fuselage Nose Taper Length | 60 mm | 20 – 120 |
| Fuselage Tail Taper Length | 60 mm | 20 – 120 |
| Wing Saddle Length | 70 mm | 20 – 120 |
| Wing Saddle Width | 25 mm | 10 – 50 |
| Wing Saddle Depth | 3 mm | 1 – 10 |
| Fuselage CG Slot Length | 40 mm | 10 – 100 |
| Fuselage CG Slot Width | 8 mm | 2 – 20 |
| Fuselage CG Slot Depth | 10 mm | 2 – 20 |
| Fuselage CG Slot X Offset | -10 mm | -80 – 80 |
| Main Wing Span | 450 mm | 250 – 800 |
| Main Wing Chord | 80 mm | 40 – 160 |
| Main Wing Thickness | 4 mm | 2 – 10 |
| Main Wing Reinforced Center Span | 80 mm | 20 – 160 |
| Main Wing Center Reinforcement Thickness | 2 mm | 1 – 6 |
| Main Wing Saddle Length | 70 mm | 20 – 120 |
| Main Wing Saddle Width | 25 mm | 10 – 50 |
| Main Wing Saddle Depth | 3 mm | 0.5 – 5.5 |
| Horizontal Tail Span | 150 mm | 80 – 300 |
| Horizontal Tail Chord | 45 mm | 20 – 100 |
| Horizontal Tail Thickness | 3 mm | 1.5 – 8 |
| Horizontal Tail Mounting Tab Length | 20 mm | 10 – 60 |
| Horizontal Tail Mounting Tab Width | 12 mm | 4 – 40 |
| Horizontal Tail Mounting Tab Height | 4 mm | 1 – 10 |
| Vertical Stabilizer Height | 55 mm | 20 – 100 |
| Vertical Stabilizer Root Chord | 45 mm | 20 – 100 |
| Vertical Stabilizer Thickness | 3 mm | 1.5 – 6 |
| Vertical Stabilizer Tip Chord | 20 mm | 5 – 80 |
| Vertical Stabilizer Root Tab Length | 35 mm | 10 – 80 |
| Vertical Stabilizer Root Tab Height | 8 mm | 2 – 20 |
| CG Bracket Length | 35 mm | 15 – 70 |
| CG Bracket Width | 20 mm | 8 – 40 |
| CG Bracket Height | 15 mm | 5 – 30 |
| CG Bracket Slot Length | 20 mm | 5 – 40 |
| CG Bracket Slot Width | 5 mm | 2 – 15 |
| CG Bracket Slot Depth | 8 mm | 2 – 15 |
| CG Bracket Pivot Hole Diameter | 4 mm | 1.5 – 10 |
| Horizontal Pivot Shaft Length | 80 mm | 40 – 160 |
| Horizontal Pivot Shaft Diameter | 4 mm | 1.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
