Enclosures and housings
Continuum_Tendon_Guide_Disc
- Bounding box
- 35.0 × 35.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully parametric 3D CAD model of a tendon guide disc for a tendon-driven continuum robot. **Units:** millimeters (mm). **Part geometry:** - Circular disc with an outer diameter of 35 mm. - Disc thickness: 3 mm. - One central through-hole with a diameter of 6 mm. - Three tendon guide through-holes, each with a diameter of 2 mm. - The three tendon holes must be equally spaced at 120 degrees around the center. - The tendon holes must lie on a pitch circle with a radius of 15 mm. - Add a 0.3 mm chamfer to the edges of the tendon holes and central hole. - Keep the outer disc edges sharp unless a small edge chamfer is required for manufacturability. **Geometric requirements:** - The disc must be a single solid body. - All holes must be through-holes. - The central hole must be concentric with the outer disc. - The tendon holes must be symmetric around the central axis. - Avoid self-intersections, open surfaces, and invalid geometry. **CAD requirements:** - Create an editable parametric solid model. - Use a sketch and extrusion-based feature structure where possible. - Keep the main dimensions editable. - Export the final model as a STEP file using AP214 or AP242. - Name the part: Continuum_Tendon_Guide_Disc. Do not create a 2D drawing or a rendered image. Create an actual 3D solid CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 35 mm | 20 – 100 |
| Disc Thickness | 3 mm | 1 – 10 |
| Central Hole Diameter | 6 mm | 3 – 20 |
| Tendon Hole Diameter | 2 mm | 0.5 – 5 |
| Pitch Circle Radius | 15 mm | 8 – 40 |
| Number of Tendon Holes | 3 | 2 – 12 |
| Hole Edge Chamfer | 0.3 mm | 0.1 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no