Conical UAV Nose Cone

REBUILD CONICAL GEOMETRY: Delete the bulbous organic shape. Re-render this part using strict, precise precision modeling parameters. The part is a sharp, straight-walled, hollow aerodynamic nose cone shell with a flat, open circular base that transitions evenly to a narrow point. 1. BASE SHAPE: The rear base must be a flat, perfectly flush circle with a wide 125mm outer diameter to match the plywood deck width. 2. CONE WALLS: The outer walls must extend straight forward over a total length of 300mm, tapering perfectly linearly down from the 125mm base diameter to a narrow 30mm diameter at the front apex. The walls must be perfectly straight with zero curvature or ballooning. 3. FRONT HOUSING: At the sharp 30mm front tip, integrate a concentric 12.5mm circular through-hole running down the central axis for the camera lens aperture. 4. PITOT TUBE CHANNEL: Just below the camera aperture, add a 4.1mm cylindrical solid sleeve running parallel to the core axis to receive a 4mm metallic pitot tube. 5. SHELL THICKNESS: The entire internal cavity must be completely hollow with a uniform, rigid wall thickness of exactly 2.5mm.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.