Enclosures and housings
Condensate Reservoir with Pump Cradle and Lid
- Bounding box
- 172.0 × 163.0 × 80.3 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional PETG FDM 3D-printable condensate water reservoir for an air conditioner. The design must have EXACTLY TWO printable parts: 1. Main reservoir 2. Removable lid RESERVOIR: - Approximately 1 liter internal capacity. - Compact rectangular shape, around 150 × 100 × 80 mm. - Approximately 3 mm walls. - Completely open top with a separate removable lid. - Smooth and easy-to-clean interior. WATER OUTLET: - 1/4 inch outlet on the lowest possible point of the side wall. - The internal opening must be almost flush with the internal bottom. - Slight internal bottom slope toward the outlet. - Reinforced outlet base with a strong hose connection and small retaining ridge. - Do not place the outlet high on the tank. WATER INLET: - Simple condensate hose inlet near the top of the reservoir. 12V PUMP: - Do NOT place the pump inside the reservoir. - Create an external, open pump cradle attached to the reservoir. - The cradle should fit a small RS-385 12V pump, approximately 90 × 40 × 35 mm. - Allow access to the pump, hoses and electrical wires. - Keep the pump outside the water and protected from direct splashing. - The pump cradle must be integrated into the main reservoir, not a third separate part. LID: - Separate removable lid. - Simple mechanical fit. - Easy to remove for cleaning and maintenance. Keep the design simple, strong, compact and easy to print on a Creality Ender-3 V3 SE with PETG. Avoid unnecessary details and difficult overhangs. Prioritize functionality and easy maintenance.
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir Length | 150 mm | 80 – 300 |
| Reservoir Width | 100 mm | 60 – 250 |
| Reservoir Height | 80 mm | 40 – 200 |
| Wall Thickness | 3 mm | 2 – 6 |
| Bottom Slope Height | 5 mm | 0 – 10 |
| Outlet Center Height | 6.7 mm | 4 – 15 |
| Outlet Bore Diameter | 6.35 mm | 4 – 12 |
| Outlet Boss OD | 14 mm | 8 – 25 |
| Outlet Boss Length | 10 mm | 5 – 20 |
| Barb Length | 12 mm | 6 – 25 |
| Barb Base OD | 8 mm | 5 – 12 |
| Barb Tip OD | 7 mm | 4 – 10 |
| Barb Ridge OD | 8.5 mm | 5 – 14 |
| Barb Ridge Width | 2 mm | 1 – 5 |
| Outlet Boss Fillet Radius | 2 mm | 0.5 – 4 |
| Cradle Internal Length | 110 mm | 90 – 160 |
| Cradle Internal Depth | 60 mm | 40 – 100 |
| Cradle Internal Height | 50 mm | 35 – 80 |
| Cradle Front Wall Height | 20 mm | 5 – 50 |
| Pump Rail Inner Spacing | 40 mm | 30 – 60 |
| Pump Rail Width | 5 mm | 2 – 10 |
| Pump Rail Height | 10 mm | 5 – 20 |
| Inlet Bore Diameter | 8 mm | 5 – 20 |
| Inlet Boss OD | 14 mm | 8 – 25 |
| Inlet Boss Length | 8 mm | 4 – 20 |
| Inlet Height | 65 mm | 20 – 150 |
| Inlet X Offset | 0 mm | -60 – 60 |
| Lid Thickness | 3 mm | 2 – 5 |
| Lid Lip Height | 5 mm | 2 – 10 |
| Lid Lip Clearance | 0.2 mm | 0.1 – 0.5 |
| Lid Separation Gap | 0.2 mm | 0 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no