Enclosures and housings
Composite Roof Assembly with Parapet and Gutter
- Bounding box
- 8240.0 × 20111.8 × 1146.6 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical Plant Room & Chiller Gantry Roof Roof coverings As BHP drawing 24080-BHP-00-RF-DR-A-5202-T01 Roof Plan; in accordance with architectural specification 100mm thick Trimo Trimoterm SNV composite roofing system, 1000mm wide; trapezoidal roof panels; (or equal and approved) to suit minimum 3 degree roof pitch; colour: metallic silver grey; including mineral wool core insulation; including for all purlins and secondary steelwork as required; as BHP drawing 24080-BHP-00-XX-DR-A-4002-T01 DETAIL SECTION A, B & C extra over for metal parapet capping RAL 7012 basalt grey extra over for Trimo 835 Profiled Panel; as BHP drawing 24080-BHP-00-XX-DR-A-4002-T01 DETAIL SECTION A, B & C extra over for insulated gutter and flashings to specialist subcontractor details; as BHP drawing 24080-BHP-00-XX-DR-A-4002-T01 DETAIL SECTION A, B & C
Parameters
| Name | Value | Range |
|---|---|---|
| Roof length (along slope) | 10000 mm | 5000 – 30000 |
| Roof width (across slope) | 8000 mm | 4000 – 20000 |
| Roof pitch | 3 deg | 1 – 15 |
| Total panel thickness | 100 mm | 60 – 200 |
| Valley (base) thickness | 60 mm | 40 – 150 |
| Rib height | 40 mm | 10 – 100 |
| Rib base width | 100 mm | 40 – 200 |
| Rib top width | 40 mm | 20 – 150 |
| Panel width (rib spacing) | 1000 mm | 500 – 1500 |
| Parapet wall height | 300 mm | 150 – 600 |
| Parapet wall thickness | 100 mm | 60 – 200 |
| Capping width | 200 mm | 100 – 400 |
| Capping thickness | 30 mm | 10 – 50 |
| Capping overhang | 20 mm | 0 – 100 |
| Gutter outer width | 300 mm | 150 – 500 |
| Gutter outer depth | 200 mm | 100 – 400 |
| Gutter wall thickness | 20 mm | 10 – 50 |
| Gutter vertical offset below roof | 50 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no