Enclosures and housings
Complete 17-inch Motorcycle Wheel and Brake Assemblies - Front and Rear
- Bounding box
- 1293.0 × 600.0 × 140.2 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Complete editable concept wheelset consisting of front and rear 110/70 R17 and 140/60 R17 tyres, separate 10-spoke aluminium alloy wheels with hubs, and separate perforated brake rotors. Uses 431.8 mm bead-seat diameter to match the earlier 17-inch tyres/rims. All six components are named solids. Front and rear sets are spaced apart along X for visibility only; move into motorcycle layout during final assembly. Not a production-validated brake or wheel design.
Parameters
| Name | Value | Range |
|---|---|---|
| 17-inch tyre bead-seat diameter | 431.8 mm | 431 – 433 |
| Rim barrel radial depth | 10 mm | 7 – 14 |
| Alloy wheel spoke count | 10 count | 10 – 10 |
| Bead retaining lip width | 4 mm | 2 – 6 |
| Bead retaining lip height | 2 mm | 1 – 3 |
| Hub extension beyond rim each side | 8 mm | 4 – 12 |
| Tyre sidewall edge height | 13 mm | 9 – 18 |
| Tyre bead transition length | 12 mm | 8 – 18 |
| Tread groove depth | 5 mm | 2 – 8 |
| Tread groove width | 4 mm | 2 – 7 |
| Directional tread groove count | 24 count | 12 – 48 |
| Tread groove axial span ratio | 0.42 ratio | 0.25 – 0.6 |
| Directional tread skew ratio | 0.13 ratio | 0.05 – 0.2 |
| Front tyre outer diameter | 585.8 mm | 570 – 600 |
| Front tyre section width | 110 mm | 100 – 120 |
| Front rim width | 76.2 mm | 63.5 – 88.9 |
| Front axle bore | 15 mm | 12 – 20 |
| Front hub diameter | 100 mm | 85 – 115 |
| Front spoke root width | 14 mm | 10 – 20 |
| Front brake disc outer diameter | 260 mm | 240 – 280 |
| Front brake disc centre opening | 80 mm | 70 – 90 |
| Front disc thickness | 4 mm | 3 – 5 |
| Front disc bolt circle diameter | 90 mm | 84 – 100 |
| Front disc vent hole circle diameter | 188 mm | 160 – 210 |
| Front disc vent hole count | 18 count | 12 – 24 |
| Rear tyre outer diameter | 599.8 mm | 585 – 615 |
| Rear tyre section width | 140 mm | 130 – 150 |
| Rear rim width | 88.9 mm | 76.2 – 114.3 |
| Rear axle bore | 17 mm | 14 – 25 |
| Rear hub diameter | 110 mm | 95 – 125 |
| Rear spoke root width | 17 mm | 12 – 24 |
| Rear brake disc outer diameter | 220 mm | 200 – 240 |
| Rear brake disc centre opening | 80 mm | 70 – 90 |
| Rear disc thickness | 4 mm | 3 – 5 |
| Rear disc bolt circle diameter | 90 mm | 84 – 100 |
| Rear disc vent hole circle diameter | 164 mm | 145 – 180 |
| Rear disc vent hole count | 16 count | 12 – 24 |
| Brake disc mounting hole diameter | 8 mm | 6 – 10 |
| Brake disc mounting hole count | 6 count | 4 – 8 |
| Brake disc ventilation hole diameter | 6 mm | 4 – 8 |
| Front-to-rear display separation | 700 mm | 650 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no