Enclosures and housings
Compact Wardrobe 1200x500x1600
- Bounding box
- 1393.6 × 1070.5 × 1600.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic, editable 3D CAD model of a compact wardrobe for my Cambridge IGCSE Design and Technology 0445 project. 1. OVERALL DIMENSIONS - Height: 1600 mm - Width: 1200 mm - Depth: 500 mm 2. MATERIALS Use 16 mm black melamine-faced board for all wardrobe components, including the side panels, top, bottom, shelves, centre divider, doors, drawer components and back panel. Do not use 3 mm hardboard. 3. INTERNAL LAYOUT Left section: - Include exactly five evenly spaced horizontal shelves. - All five shelves must fit within the 1400 mm upper section of the wardrobe. - Position the shelves proportionally, leaving practical storage space between them. - Keep the shelves entirely within the left section. Right section: - Include exactly one shelf at the top of the right section, above the metal hanging rod. - Position the metal rod below this shelf. - Leave sufficient vertical space beneath the rod for hanging clothes. - Do not add any extra shelves to the right section. 4. BOTTOM DRAWERS - Include two drawers at the bottom of the wardrobe. - The drawer section must be 200 mm high and fit within the total wardrobe height of 1600 mm. - The upper section above the drawers must be 1400 mm high. - Ensure the drawers fit properly within the wardrobe structure. 5. DOORS AND HANDLES - Include hinged wardrobe doors that cover the front of the storage sections. - Use black rectangular handles. - Ensure the doors align properly with the internal centre divider. 6. LEGS - Include four short, circular legs, with two legs on each side. - Make the legs approximately 80 mm high. 7. CONSTRUCTION DETAILS - Use a vertical centre divider to separate the left shelving section from the right hanging section. - Use 16 mm-thick board throughout. - Make the top panel fit between the two side panels. - Ensure all components fit together realistically and can be manufactured using normal woodworking techniques. - Maintain practical clearances for the doors and drawers. 8. MODEL AND PRESENTATION - Generate a genuine, editable 3D CAD model, not merely a picture or artistic illustration. - Show the wardrobe with the doors open or removed so that the internal shelves, hanging rod and drawers are clearly visible. - Keep the design simple, neat, proportional and realistic. - Display the overall dimensions and important component measurements. - Make the model suitable for a school Design and Technology project and allow me to modify individual components and measurements. IMPORTANT REQUIREMENTS The wardrobe must have exactly five shelves on the left within the 1400 mm upper section, exactly one shelf above the metal hanging rod on the right, and a 200 mm-high drawer section at the bottom. The total wardrobe height must remain 1600 mm, with an overall width of 1200 mm and depth of 500 mm. Use 16 mm black melamine-faced board for every panel, including the back panel.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 1200 mm | 900 – 1800 |
| Overall height (incl. legs) | 1600 mm | 1200 – 2200 |
| Overall depth | 500 mm | 350 – 700 |
| Board thickness (all panels) | 16 mm | 12 – 25 |
| Leg height | 80 mm | 0 – 200 |
| Leg diameter | 50 mm | 25 – 80 |
| Drawer section height | 200 mm | 120 – 400 |
| Left shelves (evenly spaced) | 5 off | 1 – 8 |
| Right top shelf height (underside) | 1550 mm | 400 – 1560 |
| Hanging rod diameter | 20 mm | 10 – 40 |
| Hanging rod centre height | 1300 mm | 400 – 1500 |
| Drawer width | 576 mm | 200 – 900 |
| Drawer depth (incl. front) | 450 mm | 200 – 480 |
| Drawer height | 180 mm | 80 – 260 |
| Drawer side clearance | 2 mm | 0 – 10 |
| Door open angle | 100 deg | 0 – 135 |
| Handle length | 120 mm | 60 – 300 |
| Handle width | 20 mm | 10 – 50 |
| Handle projection | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no