Brackets and mounts
Compact Pocket Utility Knife (Stanley 1992) Rev C - Locking, CNC-ready
- Bounding box
- 78.0 × 27.0 × 11.5 mm
- Engine
- Precision B-rep
- Parameters
- 44
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
2-piece aluminum pocket utility knife handle for Stanley 1992 blades, 78x27x9 mm, CNC-optimized. Blade carrier locked by an M2 thumb screw that clamps the carrier against the front plate, 4 mm thumb slot, 3 spring detents with 1 mm slits, engraved 2 in scale with 1/16 in ticks, 2 M3 countersunk screws at rear corners, 2 blind dowel pins (1.5 mm) at nose corners, 1 mm pocket corner radii, built-in interference check.
Parameters
| Name | Value | Range |
|---|---|---|
| Handle length | 78 mm | 70 – 120 |
| Handle width | 27 mm | 25 – 34 |
| Assembled thickness | 9 mm | 8.5 – 14 |
| Corner radius | 3 mm | 1 – 6 |
| Outer edge chamfer | 0.4 mm | 0 – 1 |
| Blade length (1992) | 62 mm | 55 – 70 |
| Blade width (1992) | 19 mm | 17 – 21 |
| Blade thickness | 0.65 mm | 0.5 – 0.8 |
| Pocket side clearance | 0.4 mm | 0.1 – 1 |
| Blade protrusion when extended | 18 mm | 14 – 24 |
| Pocket floor depth (back plate) | 0.4 mm | 0.2 – 0.8 |
| Pocket internal corner radius | 1 mm | 0.5 – 2 |
| Carrier thickness | 1.2 mm | 0.8 – 2 |
| Carrier length | 39 mm | 34 – 42 |
| Blade notch spacing (verify on blade) | 12 mm | 8 – 16 |
| Carrier pin dia | 2 mm | 1.4 – 2.4 |
| Thumb boss dia | 3.6 mm | 3.2 – 4.4 |
| Thumb screw tap drill (M2) | 1.6 mm | 1.5 – 1.7 |
| Thumb screw length (M2) | 4 mm | 3 – 6 |
| Thumb screw head height | 2.5 mm | 1.5 – 4 |
| Thumb screw head dia | 8 mm | 6 – 12 |
| Slide travel | 21 mm | 10 – 24 |
| Thumb slot width | 4 mm | 3.5 – 6 |
| Spring-arm slit width | 1 mm | 0.8 – 2 |
| Detent dimple radius | 0.9 mm | 0.6 – 1.5 |
| Detent dimple depth | 0.45 mm | 0.2 – 0.8 |
| Spring-arm bump height | 0.35 mm | 0.2 – 0.6 |
| Rear screw X from end | 6 mm | 5.5 – 12 |
| Rear screw offset from centerline | 9 mm | 5 – 9.5 |
| M3 clearance hole dia | 3.4 mm | 3.2 – 3.6 |
| Countersink dia (90 deg) | 6.3 mm | 5.5 – 7 |
| M3 tap drill dia (back plate) | 2.5 mm | 2.4 – 2.6 |
| M3 tap drill depth | 3.5 mm | 3 – 4 |
| Nose dowel inset from nose | 4 mm | 4 – 10 |
| Nose dowel pin dia | 1.5 mm | 1 – 2 |
| Scale start X | 18 mm | 10 – 45 |
| Scale baseline Y | -12 mm | -12.4 – -10 |
| Tick line width | 0.25 mm | 0.15 – 0.5 |
| Engrave depth | 0.2 mm | 0.1 – 0.4 |
| Inch tick length | 3.5 mm | 2 – 4 |
| 1/2 in tick length | 3 mm | 1.5 – 4 |
| 1/4 in tick length | 2.4 mm | 1.2 – 4 |
| 1/8 in tick length | 1.8 mm | 1 – 4 |
| 1/16 in tick length | 1.2 mm | 0.6 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o