Enclosures and housings
Compact Inclined Gravity Roller Conveyor
- Bounding box
- 496.2 × 680.0 × 500.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact industrial inclined gravity roller conveyor for product discharge. OVERALL DIMENSIONS: - Conveyor Length: 500 mm, adjustable from 400 to 800 mm. - Usable Roller Width: 600 mm, adjustable from 600 to 800 mm. - Maximum Height at the upper end: 500 mm. - Minimum Height at the lower end: 400 mm. - Inclination angle: approximately 11.3 degrees. ROLLER SYSTEM: - Gravity roller conveyor, without a motor. - 9 cylindrical steel rollers. - Roller diameter: 30 mm, adjustable from 25 to 40 mm. - Roller width: 600 mm. - Roller spacing: approximately 60 mm. - Rollers positioned perpendicular to the conveyor length. - Rollers evenly distributed along the entire conveyor. - All rollers must be parallel and horizontal. FRAME: - Two simple parallel longitudinal side rails. - Steel rectangular tube profile, 30 x 30 mm. - Compact and lightweight construction. - No conveyor belt. - No side covers. SUPPORT STRUCTURE: - Four short support legs. - Two supports at the high end and two at the low end. - Support legs must maintain the 11.3 degree conveyor inclination. - Simple cross-bracing only if necessary. DESIGN: - Compact tabletop-style industrial roller conveyor. - The conveyor must look like a small inclined product discharge ramp. - The complete assembly must be connected and correctly positioned. - Do not generate exploded views. - Do not generate separate floating components. - Keep geometry simple and lightweight for ABB RobotStudio. - All dimensions in millimeters. - Expose length, width, height, roller diameter and roller spacing as editable parameters. - Exportable as STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Conveyor Length | 500 mm | 400 – 800 |
| Usable Roller Width | 600 mm | 600 – 800 |
| Overall Frame Width | 660 mm | 660 – 1000 |
| Inclination Angle | 11.3 deg | 5 – 20 |
| High End Height | 500 mm | 300 – 1500 |
| Roller Diameter | 30 mm | 25 – 40 |
| Roller Spacing (max) | 60 mm | 40 – 150 |
| Frame Tube Size | 30 mm | 20 – 60 |
| Cross Member Count | 2 pcs | 1 – 10 |
| Leg Tube Size | 30 mm | 20 – 60 |
| Leg Inset | 30 mm | 10 – 150 |
| Cross Brace Height | 150 mm | 50 – 1000 |
| Foot Plate Size | 50 mm | 30 – 150 |
| Foot Plate Thickness | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no