Brackets and mounts
ComfortIQ Smart Fan Controller Enclosure
- Bounding box
- 120 × 120 × 80 mm
- Engine
- 3D Printing B-rep
- Parameters
- 49
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing ComfortIQ enclosure design. Keep the current two-part enclosure, dimensions, ventilation slots, mounting holes, and cable opening. Add a simple ESP32 development board inside the enclosure, mounted on internal supports. Add a temperature and humidity sensor near the ventilation slots, with its sensing element exposed to room air. Create an exploded assembly view showing the main enclosure, ESP32 board, sensor, and removable cover as separate components. Keep the design simple and suitable for a 3D-printed prototype.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 120 mm | 60 – 200 |
| Overall height | 80 mm | 40 – 160 |
| Overall depth | 40 mm | 20 – 100 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Outer corner radius | 3 mm | 0 – 8 |
| Front lid thickness | 2 mm | 1.2 – 5 |
| Lid to body edge gap | 0.3 mm | 0 – 1 |
| Clearance hole dia | 3.4 mm | 2.5 – 5 |
| Screw centre inset from edge | 8 mm | 4 – 20 |
| Corner boss diameter | 8 mm | 5 – 14 |
| Boss pilot hole diameter | 2.5 mm | 1.6 – 4 |
| Countersink head diameter | 6.2 mm | 3.5 – 10 |
| Countersink depth | 1 mm | 0.4 – 2.5 |
| Slots per side | 5 mm | 2 – 10 |
| Slot width | 3 mm | 1.5 – 6 |
| Slot height | 34 mm | 10 – 60 |
| Cable entry width | 26 mm | 8 – 50 |
| Cable entry depth | 12 mm | 5 – 25 |
| Grille centre height | -18 mm | -32 – 32 |
| Recess width | 26 mm | 10 – 50 |
| Recess height | 16 mm | 8 – 40 |
| Recess depth | 0.8 mm | 0.4 – 2 |
| Slot length | 20 mm | 4 – 46 |
| Slot width | 2 mm | 1 – 5 |
| Number of slots | 4 mm | 1 – 8 |
| Hole spacing X | 47 mm | 20 – 100 |
| Hole spacing Z | 22 mm | 10 – 60 |
| Standoff diameter | 6.5 mm | 4 – 12 |
| Standoff height | 5 mm | 2 – 12 |
| Standoff pilot hole dia | 2.5 mm | 1.6 – 4 |
| ESP32 centre height | 12 mm | -32 – 32 |
| Board width | 55 mm | 30 – 90 |
| Board height | 28 mm | 15 – 60 |
| Board thickness | 1.6 mm | 0.8 – 4 |
| Board mounting hole dia | 3.2 mm | 2.5 – 5 |
| USB connector width | 9 mm | 5 – 15 |
| USB connector height | 3.2 mm | 1.5 – 8 |
| USB connector length | 6 mm | 3 – 12 |
| Sensor board width Y | 18 mm | 10 – 40 |
| Sensor board height Z | 14 mm | 8 – 30 |
| Sensor board thickness | 1.6 mm | 0.8 – 4 |
| Sensor hole spacing Y | 12 mm | 6 – 30 |
| Sensor mounting hole dia | 2.7 mm | 2 – 4.5 |
| Sensor post diameter | 5 mm | 3 – 10 |
| Sensor post height | 4 mm | 2 – 12 |
| Sensor post pilot dia | 2.5 mm | 1.6 – 4 |
| ESP32 board explode offset | 40 mm | 0 – 120 |
| Sensor explode offset | 40 mm | 0 – 120 |
| Lid explode offset | 80 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o