Enclosures and housings
Combination Lock Housing
- Bounding box
- 86 × 80 × 67 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a low circular housing, outer diameter 80 mm, overall height 58 mm, wall thickness 2.2 mm. Fixed base and a lid that twists 70 degrees. Inside the base: two stacked circular spools on a central axle. Each spool flange diameter 65 mm, height 14 mm. Total stack 35 mm. Two 10 mm wide flat bands exit on opposite sides through slots with 1 mm edge radius. Lid has a 3-wheel combination lock centered on top; only the three number wheels protrude slightly. When twisted, an internal lock ring engages the spools and low-force jaws close on the bands. A spring-loaded axial pawl drops into a notch in the base to lock the position. The code lock only allows the pawl to be withdrawn when the correct code is set. Prototype concept. All band contact edges radius 1 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Base outer diameter | 80 mm | 60 – 120 |
| Base height | 40 mm | 30 – 80 |
| Wall thickness | 2.2 mm | 1.2 – 6 |
| Lid height | 18 mm | 10 – 30 |
| Lid twist angle | 70 deg | 0 – 90 |
| Band width | 10 mm | 6 – 20 |
| Band thickness | 1.2 mm | 0.8 – 3 |
| Central axle diameter | 10 mm | 6 – 20 |
| Axle length | 45 mm | 35 – 60 |
| Spool flange diameter | 65 mm | 50 – 75 |
| Spool height | 14 mm | 10 – 25 |
| Spool core diameter | 20 mm | 12 – 30 |
| Gap between spools | 7 mm | 0 – 15 |
| Lock ring inner diameter | 68 mm | 55 – 74 |
| Pawl diameter | 6 mm | 4 – 10 |
| Pawl length | 12 mm | 8 – 20 |
| Spring outer diameter | 5 mm | 4 – 8 |
| Spring free length | 10 mm | 6 – 16 |
| Jaw length | 12 mm | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
