Enclosures and housings
Coin Tray with Denomination Labels
- Bounding box
- 120.0 × 135.5 × 19.6 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model only. Add one denomination label behind each corresponding trough: R$ 1,00 50 CENTAVOS 25 CENTAVOS 10 CENTAVOS 5 CENTAVOS Use bold sans-serif uppercase text. Text requirements: - 4.5 mm character height - Minimum stroke thickness of 0.8 mm - Embossed 0.6 mm above the surface - Center each label with its trough - Keep all text physically connected to the tray - Do not change any trough dimensions
Parameters
| Name | Value | Range |
|---|---|---|
| R$1 Diameter | 27 mm | 15 – 40 |
| R$1 Thickness | 1.95 mm | 0.5 – 5 |
| 50 Centavos Diameter | 23 mm | 15 – 40 |
| 50 Cents Thickness | 2.85 mm | 0.5 – 5 |
| 25 Centavos Diameter | 25 mm | 15 – 40 |
| 25 Cents Thickness | 2.25 mm | 0.5 – 5 |
| 10 Centavos Diameter | 20 mm | 15 – 40 |
| 10 Cents Thickness | 2.23 mm | 0.5 – 5 |
| 5 Centavos Diameter | 22 mm | 15 – 40 |
| 5 Cents Thickness | 1.65 mm | 0.5 – 5 |
| Coins per Trough | 40 | 1 – 100 |
| Material Below Trough | 2 mm | 0.5 – 5 |
| Outer Wall Thickness | 2 mm | 0.5 – 5 |
| Spacing Between Troughs | 3 mm | 1 – 10 |
| Outer Corner Fillet | 6 mm | 0 – 12 |
| Bottom Edges Fillet | 1.5 mm | 0 – 3 |
| Groove Width Tolerance | 0.5 mm | 0 – 2 |
| Groove Length Extra | 2 mm | 0 – 5 |
| Groove Depth Fraction | 0.65 | 0.2 – 1 |
| Finger Notch Depth | 8 mm | 2 – 20 |
| Notch Height Fraction | 0.6 | 0.2 – 1 |
| Counting Mark Width | 0.8 mm | 0.1 – 2 |
| Counting Mark Depth | 0.5 mm | 0.1 – 2 |
| Counting Mark Length | 3 mm | 1 – 10 |
| Text Height | 4.5 mm | 2 – 10 |
| Emboss Depth | 0.6 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox