Brackets and mounts
Coffee Bar Station Organizer
- Bounding box
- 330.0 × 300.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a minimalist, functional coffee bar station organizer with the following specifications. **Overall design:** - A single-piece rectangular organizer. - Overall height: approximately 150 mm. - Clean, modern, minimalist aesthetic. - Flat bottom surface with straight exterior walls. - All dimensions are in millimeters (mm). - The organizer must be a practical storage station for coffee accessories. **Row 1 – Cup holders:** - Arrange 3 circular holes in a single straight row. - Each hole has a diameter of 100 mm. - The three holes must be evenly spaced and aligned. - Maintain approximately 5 mm of material between the outer edge of each hole and the nearest exterior side edge where applicable. **Row 2 – Accessory storage:** - Arrange the following compartments in one row: 1. One circular hole with a diameter of 135 mm, intended for coffee filter papers. 2. Two rectangular compartments with rounded corners, intended for storing coffee spoons. - The two rectangular compartments should have smooth rounded internal corners. - Arrange all three compartments horizontally in the same row. - The total length of Row 2 must be exactly equal to the total length of Row 1. **Geometric layout and orientation:** - Row 1 and Row 2 must be parallel and arranged side by side. - Maintain approximately 5 mm minimum clearance between all cutouts and the nearest exterior boundary. - Row 2 must feature a 30-degree angled transition relative to Row 1, connecting the long side of Row 1 toward the long side of Row 2. - The 30-degree angle must be incorporated into the overall geometry, not merely applied as a decorative surface detail. - Ensure the layout remains symmetrical and visually balanced. **Modeling requirements:** - Create a watertight, manifold 3D solid suitable for 3D printing. - All storage compartments must be actual recessed openings, not surface markings. - Use clean, precise geometric surfaces. - Avoid unnecessary decorative elements. - Preserve sufficient wall thickness and structural strength. - Generate a dimensionally accurate CAD model that can be edited parametrically. **Priority:** Follow the specified number, diameter, arrangement, spacing, and orientation of all compartments. Do not add or remove any holes or storage compartments.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (X) | 330 mm | 250 – 500 |
| Overall Width (Y) | 300 mm | 200 – 400 |
| Overall Height (Z) | 150 mm | 100 – 200 |
| Minimum Wall/Clearance | 5 mm | 3 – 15 |
| Cup Holder Diameter | 100 mm | 80 – 120 |
| Gap Between Cup Holders | 10 mm | 5 – 30 |
| Row 1 Centerline Y | 80 mm | 55 – 150 |
| Filter Paper Hole Diameter | 135 mm | 110 – 160 |
| Spoon Compartment Width (X) | 75 mm | 50 – 100 |
| Spoon Compartment Depth (Y) | 90 mm | 60 – 130 |
| Spoon Internal Fillet Radius | 8 mm | 2 – 15 |
| Row 2 Centerline Y | 220 mm | 150 – 260 |
| Transition Chamfer Angle | 30 deg | 15 – 45 |
| Transition Chamfer Distance | 8 mm | 3 – 15 |
| Cutout Depth (from top) | 145 mm | 100 – 149 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
