3D preview of CMM Inspection Fixture
Loading the interactive model…
Interactive 3D model of CMM Inspection Fixture

Brackets and mounts

CMM Inspection Fixture

1 views
Bounding box
209.6 × 149.6 × 26.7 mm
Engine
3D Printing B-rep
Parameters
28
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precision 3D printable CMM inspection fixture for supporting and locating a cylinder head component. The fixture must match the bottom mounting face of the component shown in the reference image. **Mounting hole positions:** - Four mounting holes arranged in a rectangular pattern. - Horizontal centre-to-centre distance: 64 mm. - Vertical centre-to-centre distance: 51.9 mm. - Hole centres must be positioned symmetrically around the origin. - Hole centre coordinates in mm: (-32, -25.95), (32, -25.95), (-32, 25.95), (32, 25.95). **Fixture geometry:** - Create a solid base plate with a flat bottom suitable for 3D printing. - Base thickness: 15 mm. - The top mating surface must reproduce the outer perimeter of the component shown in the reference image. - Include the rounded corners and curved side contours. - Include the large central opening, approximately oval with two overlapping circular profiles, as shown in the reference. - Keep the four mounting holes perpendicular to the base. - The top surface should be suitable for securely locating the component during CMM inspection. - Provide clearance around the central opening to avoid interference with the component. **Design requirements:** - Fully dimensioned, editable parametric CAD model. - Dimensions in millimetres. - Four through-holes for mounting screws. - Suitable for FDM 3D printing. - Exportable as STEP and STL. Use the reference image for the overall shape and proportions. Do not change the specified mounting hole positions.

Parameters

NameValueRange
Overall length200 mm50 – 400
Overall width140 mm50 – 400
Plate thickness above flange8 mm3 – 20
Corner lug diameter30 mm10 – 60
Side waist depth5 mm0 – 15
Opening length110 mm20 – 300
Opening width88 mm20 – 260
Opening corner radius35 mm5 – 100
Raised rim height3 mm0 – 12
Raised rim width5 mm1 – 20
Lip height under plate1.2 mm0.4 – 4
Lip radial width2 mm1 – 6
Clearance to mating part0.3 mm0.1 – 0.6
Plate overhang past lip2.5 mm0 – 12
Clearance hole dia4.5 mm2 – 10
Countersink dia9 mm4 – 20
Countersink angle90 deg60 – 120
Mounting hole half-spacing in X32 mm10 – 80
Mounting hole half-spacing in Y25.95 mm10 – 80
Component fixture base thickness15 mm5 – 40
Mounting flange width12 mm4 – 30
Component locating pocket depth1 mm0.4 – 3
Component length92 mm40 – 200
Component width76 mm30 – 160
Component corner radius18 mm3 – 50
Component side waist depth3 mm0 – 12
Oval lobe diameter30 mm10 – 80
Oval lobe centre distance22 mm0 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

CMM Inspection Fixture - Free CAD Model (STEP, STL) | TextoCAD