Enclosures and housings
Clevis with Rounded Hinge Lugs
- Bounding box
- 83.5 × 76.5 × 33.3 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 29, 2026
Download
Free to download and use. See the terms.
The prompt
Modify clevis only. Keep everything else unchanged. The hinge ears are too tall and too rounded. Each ear has a Ø6.5 transverse pin hole with its centre 43.5 mm from the main body axis. The top of each ear is only 10 mm above the pin centre. Below the pin, each ear extends directly down into the clevis base/bridge; do not create a full capsule shape. Ear thickness 3.9 mm, clear gap 28.5 mm, overall clevis width 36 mm. Make the outer end of each ear approximately semicircular only around the upper pin region. Join both ears with a solid base bridge blended into the circular body. Overall part length 90.5 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Diameter | 76.5 mm | 50 – 100 |
| Body Thickness | 12 mm | 5 – 30 |
| Cup Diameter | 60 mm | 30 – 80 |
| Cup Depth | 5 mm | 1 – 15 |
| Boss Diameter | 20 mm | 10 – 40 |
| Boss Protrusion | 3 mm | 1 – 10 |
| Bore Diameter | 8 mm | 3 – 20 |
| Top Rect Length | 40 mm | 20 – 70 |
| Top Rect Width | 30 mm | 15 – 60 |
| Top Rect Height | 8 mm | 2 – 20 |
| Inner Rect Length | 30 mm | 15 – 60 |
| Inner Rect Width | 20 mm | 10 – 50 |
| Inner Wall Thickness | 3 mm | 1 – 8 |
| Inner Height | 6 mm | 2 – 15 |
| Recess Diameter | 12 mm | 5 – 30 |
| Recess Depth | 3 mm | 1 – 10 |
| Pin Axis Distance from Center | 43.5 mm | 30 – 60 |
| Clevis Gap | 28.5 mm | 10 – 50 |
| Ear Thickness | 3.9 mm | 2 – 10 |
| Overall Clevis Width | 36 mm | 20 – 60 |
| Clevis Height | 20 mm | 10 – 40 |
| Clevis Length (reference) | 20.5 mm | 5 – 40 |
| Pin Hole Diameter | 6.5 mm | 3 – 15 |
| Pin Hole Offset from Top | 10 mm | 5 – 20 |
| Overall Length | 90.5 mm | 70 – 120 |
| Bridge Fillet Radius | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox