Brackets and mounts
Clevis Lug Joint with Clamped Bushes
- Bounding box
- 51.3 × 73 × 55 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Lug and clevis with a clamped bushes
Parameters
| Name | Value | Range |
|---|---|---|
| Base length X | 50 mm | 30 – 100 |
| Base width Y | 56 mm | 30 – 100 |
| Base thickness | 8 mm | 4 – 20 |
| Clevis arm thickness | 8 mm | 4 – 16 |
| Clevis arm depth Y | 40 mm | 20 – 80 |
| Clevis arm height from bed | 55 mm | 30 – 120 |
| Lug plate thickness | 10 mm | 4 – 20 |
| Lug tail length from pin | 45 mm | 20 – 100 |
| Lug head diameter | 34 mm | 16 – 80 |
| Lug tail width | 24 mm | 12 – 60 |
| Pin center height | 38 mm | 20 – 50 |
| Pin shaft diameter | 10 mm | 4 – 20 |
| Bushing body OD | 16 mm | 8 – 30 |
| Bushing bore | 10.2 mm | 5 – 30 |
| Bushing flange OD | 24 mm | 0.5 – 40 |
| Bushing flange thickness | 4 mm | 2 – 10 |
| Bushing inward extension | 2 mm | 0.5 – 6 |
| Pin head diameter | 18 mm | 12 – 30 |
| Pin head thickness | 5 mm | 3 – 10 |
| Nut across-corners diameter | 18 mm | 12 – 30 |
| Nut thickness | 7 mm | 4 – 15 |
| Mounting hole diameter | 4.5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o